timannnn6

iTrader: (140)

http://lmgtfy.com/?q=rc+monster+10+t+spur

darryl80

iTrader: (24)

http://www.rc-monster.com/proddetail...10tspur&cat=40

RC*PHREAK

iTrader: (146)

I may have one or two of those spurs laying around I could sell you. Let me check.

BashemSmashem

iTrader: (42)

Ok so I bought a Tenshock SC411 4600Kv motor , 14t a good start for pinion size on a large outdoor track ?

darryl80

iTrader: (24)

RC*PHREAK,

if you do have 1 or 2 of those rc monster ten t conversion spur gears i will gladly buy them from you. let me know.

RC*PHREAK

iTrader: (146)

yes, that's a good start point, but you should be able to go 15T.

darryl80

iTrader: (24)

so with that rc monster losi ten t conversion spur gear i will beable to use my 32 pitch spur gears correct?

TCCustoms

iTrader: (9)

Hey Rc Phreak...u think that new 4700kv motor be something to check into as the combo or should I stick to sc411? Kinda torn since there are so many options but I kno hobbywing really unleashes the power of these motors

RC*PHREAK

iTrader: (146)

yes. do you have a battery tray yet? i did find two RC Monster spur gears.

RC*PHREAK

iTrader: (146)

i don't know. i have one coming in next week to compare. if you don't already have an esc, the combo with it might be worth checking into. i just don't feel good about recommending something i haven't tried. i'll know more in a couple weeks when i get a chance to run it.

darryl80

iTrader: (24)

RC*PHREAK,

i do have a battery tray all i need is those rc monster ten t conversion 32 pitch spur gears.

Rockthecatbox21

iTrader: (19)

15 tooth is a little high. my motor read over 200 degrees with a 15 tooth and no fan. I am now running a 12 tooth with a fan and my motor temps are around 140 degrees now.

darryl80

iTrader: (24)

thank you to RC*PHREAK for saving me money on buying those rc monster losi ten t conversion spur gears.

RC*PHREAK

iTrader: (146)

depends on a lot of factors. around here, our quals are 5 or 6 mins and our mains are usually 6 mins. i've run as high as a 16T on my 4600 with the RX8 esc. ran 16T last week and after 6 minute main it was 165. if you're running 10 minute mains, obviously that will change things.

TCCustoms

iTrader: (9)

ok, did some looking and whats the difference from the SCT Pro and the SC8 hobbywing esc? If i look up combo part #'s i see the sc8 in one combo and the sct pro in another and i dont really see much of a difference when looking but READ what is says and it usually will say if its the sct pro or SC8 esc so kinda wondering....