Hyper TT 4wd 1/10th Truggy Thread
#469
Tech Rookie
Is there someone who have the castle creation sidewinder sct combo can post how it's going in their truggy. It's sure it can't be as good as more expensive combos. But can you still cath up with them. I ordered mine yesterday.
#470
If anyone is looking for a TT, contact Norcal hobbies in union city ca. They have 2 left on the shelf. They will ship also. Tell them Sean Sargiotto sent you and they just might ship it for free to you.
#474
#475
Tech Rookie
#476
Tech Addict
#478
Tech Rookie
This new motor have 4 pole, not 2 like in the cs36 series, giving more torque. It's the reason I'm interesseted in this motor. I would go with the ballistic 550, but for the moment I don't have "pesos" for that.
#479
Tech Elite
iTrader: (52)
No pirape, i'm asking for the new sidewinder sct combo with the 3800kv. I saw a guy who tooked pictures of is tt with this combo installed. I want to know how it performed.
This new motor have 4 pole, not 2 like in the cs36 series, giving more torque. It's the reason I'm interesseted in this motor. I would go with the ballistic 550, but for the moment I don't have "pesos" for that.
This new motor have 4 pole, not 2 like in the cs36 series, giving more torque. It's the reason I'm interesseted in this motor. I would go with the ballistic 550, but for the moment I don't have "pesos" for that.
It's a matter of usable power and speed, I will keep you guys posted...
#480
I have a Velocity 6.5 with 12tooth pinion, Havoc Sc pro with one stage of timing, 5000-40c battery, Battery case moved forward and the esc on the chassis behind the battery, Blue springs with the front spring cut for pre-load reasons,35wt Losi front, 32 1/2wt. Losi rear, rear arms moved all the way back, shock tower camber link is on the upper position and camber link is short. stock shock positions from the box, front arms are still in the same stock position. 3k,5k,3k