Hyper TT 4wd 1/10th Truggy Thread
#3152
#3153
Yeah my motor is coming in friday, I still need to track down a RX8. Maybe I'll buy new but they're on back order at Tower.
Hey is their another body that will fit this kit? When I had my Hyper 12 mini STe I never ran the stock body (fugly as hell!) but rather I made the proline crowd pleazer for the CRT.5 fit. Looked much better. This body too is ugly. Has anyone ever got another to fit?
-Tony
Hey is their another body that will fit this kit? When I had my Hyper 12 mini STe I never ran the stock body (fugly as hell!) but rather I made the proline crowd pleazer for the CRT.5 fit. Looked much better. This body too is ugly. Has anyone ever got another to fit?
-Tony
This is kind of the way i am leaning..
#3155
Honestly other than the pivot ball slop, i am not concerned over them.
I'd run it and see what happens. You may be surprised.
#3156
Just ordered kyo shims for the diffs, does the shim go in front of the bearing or behind it?
#3157
#3158
Hey I got this with my used kit.
http://www.nitrohouse.com/Car-Parts-...duct_info.html
What the hell is it for? LOL
-Tony
http://www.nitrohouse.com/Car-Parts-...duct_info.html
What the hell is it for? LOL
-Tony
#3159
Just replaced the stock grease with 5-5-2 and all tires to caliber M3. Also shock oil to 40 all around and remove front sway bar. Amazing performance and handling with castle 3800 4 pole and HW 120A esc. Highly recommended truggy.
#3160
Tech Master
iTrader: (21)
Hey I got this with my used kit.
http://www.nitrohouse.com/Car-Parts-...duct_info.html
What the hell is it for? LOL
-Tony
http://www.nitrohouse.com/Car-Parts-...duct_info.html
What the hell is it for? LOL
-Tony
#3163
#3164
Tech Initiate
Sup guys.
I need advice picking a motor/ESC combo for this kit. I would like a good mid range balance between useable power and speed. I want cool temps. I don't like pushing my electronics hard. I do plan on taking this on a decent sized 1/10th ~ 1/8th sized track.
I'm thinking a Tekin 8.5 (5300kv) may be good for the motor, but I'm not sure on the ESC. I'd take reliability over performance. I know the the MMP well proven and I hear the Tekin RS is the best performer. My budget isn't huge for this also. Any tips?
-Tony
I need advice picking a motor/ESC combo for this kit. I would like a good mid range balance between useable power and speed. I want cool temps. I don't like pushing my electronics hard. I do plan on taking this on a decent sized 1/10th ~ 1/8th sized track.
I'm thinking a Tekin 8.5 (5300kv) may be good for the motor, but I'm not sure on the ESC. I'd take reliability over performance. I know the the MMP well proven and I hear the Tekin RS is the best performer. My budget isn't huge for this also. Any tips?
-Tony
perhaps a XERUN SCT pro with tenshock SC401 4600 will bring it up to speed a little more with the torque. friend of mine ran it with 13T pinion for 4 packs and temps were just over the 50deg C and 37deg average. all these setups were less than 200usd for esc motor lcd program box and also with extra pinions and super capacitors.
batteries were turnigy 65c 6000mah nanotech and Gen ace 5000 mah 7.4v packs.
#3165
Tech Elite
iTrader: (110)
I'm new to electric been running nitro for years and I have a question. I am going to run a 10TT with CC SW 3800kv and 5000 2s 7.4 40c lipo. My question is do I need to upgrade my 4mm bullet connectors to the 5.5mm or even the 6.5mm bullet conectors since I will be pulling such high amps? Please help. Thanks