Hyper TT 4wd 1/10th Truggy Thread
#302
he pm'd me on the price of the chassis and its $110 for it
yeah the stock tires a proline holeshots and they work awsome at ocrc. the 6.5 is perfect i think for this truggy
yeah the stock tires a proline holeshots and they work awsome at ocrc. the 6.5 is perfect i think for this truggy
#303
Tech Master
iTrader: (57)
Here are some pics of the SNR Graphite Chassis with graphite center plate installed on the Hyper TT.
Attachment 659147Attachment 659148Attachment 659149
Attachment 659147Attachment 659148Attachment 659149
What springs are you using? They don't look like the orange stockers?
#304
#305
#306
the orange springs in the rear for ocrc is alittle stiff. mine nose dives all the time and threw the whoops i watch the rear get thrown all around. i'm not to sure if its the springs or the oil but im going to try the springs since thats what a fellow driver said to try first
#308
#309
Tech Rookie
#311
Hey Bolisario where you able to get the ERC mount to work with the pinion sleeve?
#312
Tech Master
iTrader: (57)
So far so good.
I'm pretty sure the HB pinion will do the trick though or just dremel off some of the back part of the pinion to shorten it.
#313
I haven't ordered the sleeve yet, been busy having fun running this truggy. I don't what happened but the pinion now covers more of the spur, there's only about 1-1.5mm of the spur showing. I guess the motor is broken-in now.
So far so good.
I'm pretty sure the HB pinion will do the trick though or just dremel off some of the back part of the pinion to shorten it.
So far so good.
I'm pretty sure the HB pinion will do the trick though or just dremel off some of the back part of the pinion to shorten it.
#314
I might have to get one of these when I can lol I hate the stock mount
#315
anyone know of any place or online shop that has one of these in-stock looking to pick one up but cannot find one anywhere...
thanks in advance
thanks in advance