Team Associated RC8Be Thread
#4802
#4809
Suspended
Joined: Feb 2011
Posts: 197
http://www3.towerhobbies.com/cgi-bin...&I=LXZXN8&P=FR
They are the shock protectors on the hpi forza flux. With a little drimmel action they will fit!
They are the shock protectors on the hpi forza flux. With a little drimmel action they will fit!
#4810
http://www3.towerhobbies.com/cgi-bin...&I=LXZXN8&P=FR
They are the shock protectors on the hpi forza flux. With a little drimmel action they will fit!
They are the shock protectors on the hpi forza flux. With a little drimmel action they will fit!
BTW, it looks like you did the same as me - steering turnbuckles installed the wrong way. The flat side should be on the passenger side, like the upper camber links. I asked a few pages back about it. I think the manual is incorrect. Just FYI. You just need to unscrew and flip 'em over. At least that is how it looks in your pic.
http://www.rctech.net/forum/8833738-post4546.html
and
http://www.rctech.net/forum/8833767-post4547.html
j
#4811
Suspended
Joined: Feb 2011
Posts: 197
Cool, thanks.
BTW, it looks like you did the same as me - steering turnbuckles installed the wrong way. The flat side should be on the passenger side, like the upper camber links. I asked a few pages back about it. I think the manual is incorrect. Just FYI. You just need to unscrew and flip 'em over. At least that is how it looks in your pic.
http://www.rctech.net/forum/8833738-post4546.html
and
http://www.rctech.net/forum/8833767-post4547.html
j
BTW, it looks like you did the same as me - steering turnbuckles installed the wrong way. The flat side should be on the passenger side, like the upper camber links. I asked a few pages back about it. I think the manual is incorrect. Just FYI. You just need to unscrew and flip 'em over. At least that is how it looks in your pic.
http://www.rctech.net/forum/8833738-post4546.html
and
http://www.rctech.net/forum/8833767-post4547.html
j
#4812
http://www3.towerhobbies.com/cgi-bin...&I=LXZXN8&P=FR
They are the shock protectors on the hpi forza flux. With a little drimmel action they will fit!
They are the shock protectors on the hpi forza flux. With a little drimmel action they will fit!
#4813
That is what I gather.
Is this how yours looks? Mine didn't after following the manual.
http://www.teamassociated.com/pictur...MG_3792_lg.jpg
Is this how yours looks? Mine didn't after following the manual.
http://www.teamassociated.com/pictur...MG_3792_lg.jpg
#4814
I don't think it really matters, as long as they all face the same direction. That way, you can turn each turnbuckle the same direction to make them longer/shorter.
Thanks for verifying that the Vorza Flux shock protectors fit. I saw that in another thread, but I didn't see where anyone tried it with an RC8Be. I'll have to buy a set.
Thanks for verifying that the Vorza Flux shock protectors fit. I saw that in another thread, but I didn't see where anyone tried it with an RC8Be. I'll have to buy a set.
#4815
Suspended
Joined: Feb 2011
Posts: 197
I don't think it really matters, as long as they all face the same direction. That way, you can turn each turnbuckle the same direction to make them longer/shorter.
Thanks for verifying that the Vorza Flux shock protectors fit. I saw that in another thread, but I didn't see where anyone tried it with an RC8Be. I'll have to buy a set.
Thanks for verifying that the Vorza Flux shock protectors fit. I saw that in another thread, but I didn't see where anyone tried it with an RC8Be. I'll have to buy a set.





