80LikesDurango DEX210 Thread
12-23-2013, 02:22 PM
Now I have finally managed to find some time to work on the car lol.
I switched the main gear on the gear diff and rebuilt everything by the manual. The problem still exists, when i have the gearbox in my hand slowly rotating the spur gear then about 2/3 of the turn is still rotating hard. The only thing I can still think of is that the brand new gearbox is kinda tight. It isn't any of the reasons above then...
When I have it open and rotate the gears by hand I don't see any additional drag or rubbing and everything is smooth.
Also after the diff rebuild, when rotating one side of the diff it's all quiet, when rotating the other side it makes a cliking noise. Fuck, as they say, you shouldn't touch a working thing.
All help is appreciated.
I switched the main gear on the gear diff and rebuilt everything by the manual. The problem still exists, when i have the gearbox in my hand slowly rotating the spur gear then about 2/3 of the turn is still rotating hard. The only thing I can still think of is that the brand new gearbox is kinda tight. It isn't any of the reasons above then...
When I have it open and rotate the gears by hand I don't see any additional drag or rubbing and everything is smooth.
Also after the diff rebuild, when rotating one side of the diff it's all quiet, when rotating the other side it makes a cliking noise. Fuck, as they say, you shouldn't touch a working thing.
All help is appreciated.
Also when I close the gearbox, I back it out 1/4 of a turn. Once the gearbox breaks in, you can snug the screws up.
12-23-2013, 04:50 PM
I added a little sticky kicks blue to my MM3 and it is simply awesome! Best jumping buggy out there.
12-23-2013, 06:18 PM
Tech Regular
iTrader: (27)
If anyone is interested, I have a Brand New DEX210 RTR for sale with extras in the For Sale Thread:
Brand New DEX210 RTR w Extras
Brand New DEX210 RTR w Extras
12-23-2013, 09:42 PM
Hi All,
Just a quick note on our alloy front bulkhead- they are now cross compatible with the type B chassis
http://www.exotekracing.com/dex210-d...ront-bulkhead/
Just a quick note on our alloy front bulkhead- they are now cross compatible with the type B chassis
http://www.exotekracing.com/dex210-d...ront-bulkhead/
12-23-2013, 10:14 PM
Mike, will you sell just the nose piece out of the chassis kit?
12-24-2013, 02:19 PM
Tech Master
iTrader: (41)
12-24-2013, 11:53 PM
12-25-2013, 12:10 AM
Just seen these on Durango web site. ALUMINIUM CVD AXLES (2pcs) TD310274 by Team Durango
12-25-2013, 11:53 AM
12-25-2013, 12:10 PM
12-25-2013, 04:42 PM
Do They Sell A Aluminum Chassis Like The TLR 22 Buggy Or Do The Have Something Similiar
12-25-2013, 06:04 PM
anyone know when the new buggy will be out?
12-25-2013, 06:09 PM
The standard DEX210 kit comes with an aluminum chassis with bolt on plastic sides just like the 22. There are also several different aftermarket aluminum chassis lengths available.
12-26-2013, 09:49 AM
Tech Rookie
One question, is too bad the RTR version of this car? I would like to get one, but as i'm not going to race i would like to keep cost at a minimum... The kit is a lot more expensive than the RTR what are the big differences??
12-26-2013, 09:54 AM
There's a lot more to the kit (from any manufacturer) but you can't get a dex210 kit right now since their coming out with a new one... soon.
If your not racing, don't worry about the extras. The rtr comes with decent electronics, its a great deal. Replace the servo, same with any other rtr.
If your not racing, don't worry about the extras. The rtr comes with decent electronics, its a great deal. Replace the servo, same with any other rtr.