SC10 Thread
03-07-2012 | 08:49 PM
03-07-2012 | 10:33 PM
03-07-2012 | 10:35 PM
I figured it was something like that. I think that is hilarious, I am the type of person to laugh and poke fun at anything. You make a stupid comment, expect to hear from me. It is kinda hard over the internet because it is so easy for someone to misread the intentions of your post. Thanks for the props on the parts. I put alot of time and work into my stuff, and it's nice to post stuff on here and have people intelligent enough to recognize what they are looking at. That is kinda the problem with my stuff, it is so trick and perfect, that if you don't know what it is, you have no idea that I didn't just buy it off the shelf. I think the vast majority of people on here fall into that category. I don't know maybe it is just me, but if I see someone post up their car and it has custom parts that look like they should be there, I give mad props. On the other hand if they make a part and it is held on with wood screws and tape, I might be inclined to poke fun.
03-08-2012 | 05:05 AM
Heading to the lhs shortly and want to try the Losi BB spring what collars and cups do i need to buy? Also which colors are closest to blue fonts and green rears? Do I buy all BB rears for both my front and rear
03-08-2012 | 06:12 AM
And Traxxas Upper Retainers: http://www.amainhobbies.com/product_...rs-Upper-Lower (I am pretty sure these are the correct retainers, I couldn't find the posting by Brent with the part #'s. Can someone confirm this is the right part please?)
The springs most like the AE green springs, IMO, would be the Losi Yellow BB springs: http://www.amainhobbies.com/product_...-Yellow-TLR-22
As far as what would match the front blue springs, I am not sure. Here is a listing of all the Losi BB springs/part #'s and their rates:
Rear: For SC10/T4/B4
TLR5165 GREY 1.6
TLR5166 WHITE 1.8
TLR5167 YELLOW 2
TLR5168 PINK 2.3
TLR5169 RED 2.6
TLR5170 ORANGE 2.9
TLR5171 SILVER 3.4
Front: For SC10/T4
TLR5178 PINK 2.3
TLR5179 RED 2.5
TLR5180 ORANGE 2.9
TLR5181 SILVER 3.2
TLR5182 GREEN 3.5
This should be all of the info you need. However, I doubt you will be able to just go to your LHS and do the conversion, b/c those Losi cups have been out of stock for a while nearly everywhere. But if you luck out and your shop happens to have some extra's left in stock... you should be good to go. Ohh, and yes, I believe you can use some of the rear springs on the front of your SC10. I currently am running pink bb springs on the rear, and silver rears on the front. Hope this all helps
03-08-2012 | 06:28 AM
Hi guys , I am wanting to know how the electrics are on the SC10RS . Looking for a truck for my nephew and I`m mainly a Losi guy but someone wants to trade me this and have no idea how these electronics are .
Thanks
Thanks
03-08-2012 | 08:33 AM
My experience is exactly the opposite. If you don't put enough torque on them, they fail to seat and you lose a tire.
Suffice to say I have three Jconcepts serrated wheel nuts for my SC10 4x4 because I lost one forever the first time I ran it.
I use CustomWorks 8-32 half height aluminum nylocks on my SC10 2w.
Suffice to say I have three Jconcepts serrated wheel nuts for my SC10 4x4 because I lost one forever the first time I ran it.
I use CustomWorks 8-32 half height aluminum nylocks on my SC10 2w.
03-08-2012 | 09:15 AM
Tech Fanatic
iTrader: (11)
Joined: Nov 2011
Posts: 877
From: Connecticut
Hope this helps,
03-08-2012 | 09:27 AM
If I tighten the front wheels down on my SC10 2w like I do the fronts of my SC10 4w, I doubt the front tires would ever turn again.
03-08-2012 | 11:56 AM
Can someone measure flat to flat on there Hexes. I don't care the brand, I am going to try to order some material and make them. My truck is in the garage and I am at work or I would do it myself. Thanks for any and all help...
03-08-2012 | 03:58 PM
Suspended
Joined: Feb 2012
Posts: 168
I have an idea. Lets play the "post pictures of our SC10's and see who's is most trick" game. Do I have any takers?