Tekin RX8 1/8 Scale Brushless ESC Thread
#1426
R/C Tech Elite Member
iTrader: (198)
Guess 4 cells..... cash is burning the pocket!! Dont want to be motored down the straight that,s 100' long max... Mains are 10 some times 20 min.... So go to Stormer and payfor it on backorder.. is that what you do? I'm just not sure, cauz if another faster way is available my cash will be tied-up there....
#1427
back-order it at a-main.. you only have to pay for it once it's available for you... that way if you can get it faster elsewhere you can cancel you order at a-main.
#1429
If you are in a big hurry RC Monster still has the 2250 K/V truggy and the 2650 buggy system in stock.
#1430
I have the 2250kv combo in my 8ight buggy with 5S it's a bit of an overkill, but so easily tameable... I love it!!
#1432
I'm not an expert and i'm sure you'll get some expert advise, but from the research i've done a 4S on a small to mid size track a 1900 or 2050 would be best.
#1433
Tech Elite
iTrader: (43)
OK Tekin.... Where do I find your new 1/8 buggy system. NO ONE Has them in stock. Can I get one direct? The motors are there but no esc... None at Stormer, Amain... what is the deal? How do go about getting one for the Jconceps race at the end of the month? What is the best way of doing this?? Help!! I run a Losi 2.0 B and was thinking of eather the 1900 or 2050... what is the best aplication? The tracks here in Florida are on the small side compared to the others I see in the Mags ..... MillsPond, Coral Springs, etc.
Rant over.
If you have smaller tracks get the 1900 you wont be out motored down the str8. As for a system you just have to get in line!
#1434
I don't think it would be slower on 4S, I have my EPA at 80% and I changed the power curve to a milder one so It won't wheelie. but on the track I go to I can run it for almost 25 minutes. Straight is 100m long.
But I haven't raced it yet so, actual run time in race conditions could be lower.
I'm running a 15/46 gear ratio, I might drop a tooth...
No problems with temps.
But I haven't raced it yet so, actual run time in race conditions could be lower.
I'm running a 15/46 gear ratio, I might drop a tooth...
No problems with temps.
#1435
I don't think it would be slower on 4S, I have my EPA at 80% and I changed the power curve to a milder one so It won't wheelie. but on the track I go to I can run it for almost 25 minutes. Straight is 100m long.
But I haven't raced it yet so, actual run time in race conditions could be lower.
I'm running a 15/46 gear ratio, I might drop a tooth...
No problems with temps.
But I haven't raced it yet so, actual run time in race conditions could be lower.
I'm running a 15/46 gear ratio, I might drop a tooth...
No problems with temps.
#1436
#1437
We do not have public shirts currently but should in the near future. We are sending out the new driver shirts with a new look now. Also out of hats and close on banners. Everything is getting a new look and we will offer more items including hoddies and over shirts. We have some slammin graphics guys that have time to have some fun now that the packaging, website and ads are rolling. Give us a little bit and we will look as good as we perform
Tekin Prez
Tekin Prez
#1438
My LHS has 1 - 2650 combo in stock. Call Ed or Bill 248-926-1140.
#1439
#1440
We do not have public shirts currently but should in the near future. We are sending out the new driver shirts with a new look now. Also out of hats and close on banners. Everything is getting a new look and we will offer more items including hoddies and over shirts. We have some slammin graphics guys that have time to have some fun now that the packaging, website and ads are rolling. Give us a little bit and we will look as good as we perform
Tekin Prez
Tekin Prez
I'm ready too buy