Originally Posted by Randy_Pike

Stock is always flowing from the Tekin facility.

Originally Posted by dzstr

Tick tock tick tock...

Originally Posted by motomanpat

It seems that this stock must be going somewhere else They were in stock at Amain for about 5 min last week! Maybe they are using this stock to replace the broken ones!

Originally Posted by Mxer59

Randy,

I got my scte all set up, (Rx8, Pro4 4600kv, Airtronics 94780)
First thing I did was update my Rx8 (hotwire: lipo set to 2s) out of the box ran it tonight anytime the sensor wire pops out or hard landing, it won't run it just cogs turn it off back on ran like a champ, did this 4 times. But the power is very smooth when no issues

Originally Posted by justag3

Originally Posted by Mxer59

Randy,

I got my scte all set up, (Rx8, Pro4 4600kv, Airtronics 94780)
First thing I did was update my Rx8 (hotwire: lipo set to 2s) out of the box ran it tonight anytime the sensor wire pops out or hard landing, it won't run it just cogs turn it off back on ran like a champ, did this 4 times. But the power is very smooth when no issues

Originally Posted by IROC-AR15

OMG....
Why didn't anyone tell me that a 1550kv motor on 5s is such a beast!
I mean I used to have a CC MM 2200kv x 4s system and my Tekin 5s is so much more beasty! Wheelies with ease yet is controllable, its amazing seeing my truggy fly past me and the front tires looking like cookie cutters and like they are barely are touching the ground.
I'm having one problem though, I'm running a 5s 30-40c 5000mah pack, my runtime is very horrible to say the least. I have punch setup to be as aggressive as possible, full timing, 20% initial brake, 50% reverse force, 50% max brake strength. Truggy is a Tekno MBX5T 17/46 gearing. I bought the battery used, could it be time for a new lipo? If so 6s here I COME!
Neither battery, lipo, nor esc gets warm so why aren't I getting more than 5-6 mins run time?

Originally Posted by Randy_Pike

This was one of the reasons why we pulled down 222 from the site. Please read a few pages back. Going back to 212 will correct the issue.

Originally Posted by Mxer59

Will the power delivery still be as smooth?? The reason I ask this is we have a huge 1/8 jump on are track, there's two other trucks excatly the same as mine. There on 212, but my truck cleared it every lap smooth they could not get it.

Thanks for the help lookin forward to the revision of 222

Originally Posted by jmackani

Are you really sure the are exactly the same? I have seen differing shock setups make a big difference when clearing things like you have explained. Radio setups also can make them different with exponential, etc.

Originally Posted by Mxer59

Same system, Bce chassis, Tlr tuning Kit, same springs, and also both running Airtronics M8's

Originally Posted by DaveW

Youre forgetting "the driver mod". Are you driving the other chassis too to see if its the chassis or the driver?