FlyingFINN

iTrader: (1)

Thanks.
Another question what servo arm is used on the 1.0 (part # or anything)? Is there an aluminum one I can use?
I just got a used 1.0 and trying to clean it a little found that I don't have a servo arm.

Frank L

iTrader: (148)

ok servo arm?? There is a servo horn it sits directly on top of the servo, steering linkage it connects the sevo horn to the servo saver top and servo saver top. Which one are you needing?

R40Victim

iTrader: (1)

There are aluminum servo arms available for most servos. They are brand specific, meaning a servo arm for a JR will NOT fit a Futaba servo and vice versa. What brand servo are you using?

Casper

iTrader: (34)

Losi makes alum servo arms for all the different servo's.

http://search.horizonhobby.com/index...ervo+arm&N=685

FlyingFINN

iTrader: (1)

Sorry, the servo horn is what I need. I have a hitec servo so the hitec aluminum one will work?

R40Victim

iTrader: (1)

Most likely, yes. You merely need to confirm it's close in length, and/or has a hole in the right place to connect it.

Casper

iTrader: (34)

This is the one you need then.

http://www.horizonhobby.com/Products...odID=LOSA99033

These work great!

fpart

iTrader: (41)

Im sorry if this has been asked before! Does anyone know if someone makes an aftermarket battery tray. Mine has broken and even with foam padding allows my lipo to shift in the tray and even come out.

Any help would be appreciated.

Mr. Mya

Eliterc.com has one, but they're sold out at the time or maybe the adjustable one that come in the HPI Vorza?

Casper

iTrader: (34)

I put a block of hard foam in the front of my battery and then a thin layer on the bottom of the tray. If you have a spacer the right size in the car and velcro it down tight it should not move at all.

blade329

iTrader: (114)

I have broken two trays so far even with hard foam in the the tray. I added a velcro strap down the middle and we'll see how that holds up. RC-Monster makes a high quality tray for the 8ight, but it doesn't fit worth a darn and you have to remove the center spacer. I'm going to return it.

FlyingFINN

iTrader: (1)

Thanks for the help guys. I can't wait to get it running. Just need my esc/motor.

TeckLancer

iTrader: (16)

dude i have been waiting for the new 2.0 to come back stock now its saying early jul. this makes me mad

come on horizon

Casper

iTrader: (34)

ETA in the systems is 6/25 which is friday. You have to give time for them to check in the kits and then ship them back out though. You may get one by mid next week?

JimmyS1985

iTrader: (1)

Any idea where I can get some new Losi velcro straps for my 8ight-E 2.0?