JConcepts Thread
#6422
Would the hybrids 3052 be a good race or practice tire at scrc
#6423
Tech Addict
iTrader: (24)
Thats kinda what I was thinking. I have actually mounted to the back of hub just to check clearance and possible options, but never drove truck. If the camber is only difference, which can be adjusted for, why would someone not want to do it, if it would solve there problem?
#6424
Tech Elite
iTrader: (72)
Thats kinda what I was thinking. I have actually mounted to the back of hub just to check clearance and possible options, but never drove truck. If the camber is only difference, which can be adjusted for, why would someone not want to do it, if it would solve there problem?
#6428
Sorry; no plans right now.
Not at the moment; to many other projects right now.
I don't really know; might need longer turnbuckles too?
SCRC is really high-bite now; maybe Hybrids in Blue compound might give you better wear with good performance.
No; only as a kit.
I think we are quickly finding the problems with the inner rear ball-cups popping off.
The body mold is finished and we are working on the press release; production should start later this week.
Any chance JC could make a rear tower for the B4 to run BB shocks that doesn't require any shimming, canting of shocks or dremeling, since AE isn't apparently interested in producing an adequate tower?
Edit: sorry dumb question lol. will get the new ballcups.
Any ideas if the new ones work with DEX210 and AE ball studs?
Any ideas if the new ones work with DEX210 and AE ball studs?
Would the hybrids 3052 be a good race or practice tire at scrc
Cool, thanks Yankee. Does JC sell just the front anti roll bar for the sc10.2? I have seen the front and rear as a kit but I have the rear already.
Hideeho
Yes, shaved with 1 1mm shim, inside, "a" hub tower, #2 hole, 2 limiters in shocks.
P.s. after seeing it mentioned reminded me I have the hub tower on the rear also.
Yes, shaved with 1 1mm shim, inside, "a" hub tower, #2 hole, 2 limiters in shocks.
P.s. after seeing it mentioned reminded me I have the hub tower on the rear also.
When we will be able to get C4.2 bodies? I want to have one painted and ready to go when my kit gets here.
#6431
Can you make the Rulux wheels in the b4 hex please.. This style is ready to make a comeback. I bet you
#6432
It's not my decision, but we have discussed it several times in the past. Each time the numbers don't really add up, but it's at least on the table .
btw...I did see the post on the B4.2 thread...Ha
btw...I did see the post on the B4.2 thread...Ha
#6435
I remember running those on my b4.1. They were pretty awesome, but now I have hexes