Rips are the standard we use. Smooth and predictable steering
Groovy's are more aggressive. Can be very twitchy in high traction.

Does the Monroe Battery strap for the SC10 have more clearance for the bullet battery terminals if running a shorty pack all the way to the front?
(which you can not do with the std FT sc10 battery strap as it totally covers the battery terminals)

With 1/8 Barcodes, which side goes to the outside, the zigzag or the wishbone style???

I have the same issue with the FT battery strap.

I dont have a Monroe, but based on this pic, It's hard to tell... They are doing it with a standard pack, but a shorty pack all the way up? I doubt it.

http://cdn8.rccaraction.com/wp-conte...02b.jpg?8a12f1

Hey Paul, Has any one trued cutting some 3d's for buggy fronts? Just curious if it would be better then the dd's cut.

Any news on the anti-roll setup for the SC10 yet?

Thanks MaplestreetRC , yeah looks like it could be a close fit, Intellect lipos look as tho the terminals are a tad out wider on the pack also so i might have to buy a monroe and just see..... (don't worry I know CF is conductive ;) )

Aslo does anyone know with the JC bodys for Short Course trucks what is better or newer "X-flow" design or "Hi-Flow" ?

any chance of a flat spot on the closed cell inserts of my Subcultures to re-elevate, or should I dump them? the outer sidewall of one of the inserts is also assymetrical, what to expect?

im asking this question again, im ready to start glueing and unsure!

I'm not sure personally, but look for SCT permounts or pictures of SCT tires mounted (I say this because the SCT ones will mount only one way). Just a thought

sct ones are reversible.

i just found the fitting guide on there website, on the "in detail section"

How would the SCT ones be reversible? One side of the bead is 2.2" and the other is 3.0", therefore impossible to reverse them

I'm not sure, will have to check on that.

I haven't; I've just used the cut down DD's.

Not yet; we are reviewing sample production pieces now.

I prefer the Hi-Flow.

Please contact us directly for customer support.

The "V" to the outside gives more traction - The "u" to the outside is less traction.

Hey Paul, any update(s) to the release of the aluminum steering bellcrank for the B4/T4/SC10?

Thanks

I don't have an ETA yet.