JConcepts Thread
#1561
With all due respect i think if you are going to make the new wheels QC then it does not make sense to have the J82 not be QC. I love the QC wheels and dont plan to go back ( so im lazy, so what) You talk about running 2 classes but you are making it very hard to do that running your products. I like your stuff and am thinking about getting a J82 but the fact that i need to have to change out the driveshafts to do it keep me from doing it.
I have switched my standard T4 hubs to QC and do not plan on going back. I also race a GT2 so it makes sense to keep the QC rims on my trucks.
I do have a J82 and will be building it from my spare T4 parts.
The J82 Rims are not like the stock T4 rims... they are slightly narrow to keep the appearence of a buggy.
Root,
We need to get you and Andy to a race in the NE
Later
Kevin Boyle
#1562
Tech Champion
iTrader: (33)
With all due respect i think if you are going to make the new wheels QC then it does not make sense to have the J82 not be QC. I love the QC wheels and dont plan to go back ( so im lazy, so what) You talk about running 2 classes but you are making it very hard to do that running your products. I like your stuff and am thinking about getting a J82 but the fact that i need to have to change out the driveshafts to do it keep me from doing it.
Exactly i just pwned jconcepts with my post........ they werent thinking on that one.
let's come out with a buggy concept for the t4 without QC wheels........
Now lets come out with jconcepts QC t4 wheels .......
the j82 doesnt use qc and the t4wheels do.....
Makes zero sense if it was the standard the j82 should have qc wheels.
#1563
With all due respect i think if you are going to make the new wheels QC then it does not make sense to have the J82 not be QC. I love the QC wheels and dont plan to go back ( so im lazy, so what) You talk about running 2 classes but you are making it very hard to do that running your products. I like your stuff and am thinking about getting a J82 but the fact that i need to have to change out the driveshafts to do it keep me from doing it.
So what you are saying is that you would run a Mod/Stock Truck and J82 using the same truck? If that is the case I would build up an extra set of rear arms including the hub. and just swap them out depending on the class.
I have switched my standard T4 hubs to QC and do not plan on going back. I also race a GT2 so it makes sense to keep the QC rims on my trucks.
I do have a J82 and will be building it from my spare T4 parts.
The J82 Rims are not like the stock T4 rims... they are slightly narrow to keep the appearence of a buggy.
Root,
We need to get you and Andy to a race in the NE
Later
Kevin Boyle
I have switched my standard T4 hubs to QC and do not plan on going back. I also race a GT2 so it makes sense to keep the QC rims on my trucks.
I do have a J82 and will be building it from my spare T4 parts.
The J82 Rims are not like the stock T4 rims... they are slightly narrow to keep the appearence of a buggy.
Root,
We need to get you and Andy to a race in the NE
Later
Kevin Boyle
I wouldnt care so much but the pro-line front t4 wheels suck, Can't wait for the rt5.....
Exactly i just pwned jconcepts with my post........ they werent thinking on that one.
let's come out with a buggy concept for the t4 without QC wheels........
Now lets come out with jconcepts QC t4 wheels .......
the j82 doesnt use qc and the t4wheels do.....
Makes zero sense if it was the standard the j82 should have qc wheels.
Exactly i just pwned jconcepts with my post........ they werent thinking on that one.
let's come out with a buggy concept for the t4 without QC wheels........
Now lets come out with jconcepts QC t4 wheels .......
the j82 doesnt use qc and the t4wheels do.....
Makes zero sense if it was the standard the j82 should have qc wheels.
#1564
Good Question
How many people have broke the Rulux Rims?
Those xxx-4 rims sux because they already have started cracking on my B44..
But yet the Rulux rims I have been holding up pretty good.
Reminds me of the durable RPM plastic parts.
It does say Ifmar world champs on the bags you get with the rims.
Jconcepts Rocks!!
Those xxx-4 rims sux because they already have started cracking on my B44..
But yet the Rulux rims I have been holding up pretty good.
Reminds me of the durable RPM plastic parts.
It does say Ifmar world champs on the bags you get with the rims.
Jconcepts Rocks!!
#1565
#1566
Tech Fanatic
I agree that they make look a little weird with the QC on the back of a buggy, but i wouldn't bring up the option of running 2 classes then. To be honest i already have a spare set of hubs and axles i ill probably just get new cva's for but i don't plan on running 2 classes on the same day.
#1570
What is the pn for the wings that come with the B4 hi-flow body?
#1573
Tech Champion
iTrader: (33)
Yea, we get that part but if QC is the standard then why make a j82 not the standard and your new t4 wheels QC, too backwards. I am ditching my t4 anyway i hate the front wheels. They wobble and its so inconsistant. I can't wait for the kyosho truck. I might keep my t4 and make a j82 to play with in the yard and street cause my track really ain't into it
I was though, but i am a huge buggy lover !!
#1574
Tech Fanatic
Yes but one of the originl selling points was to run 2 classes with the same car( or is it truck?) all you would have to do is change the wheels and the body. Its just not that simple if you have to change the rear axles as well becasue ir run the QC in truck. I was just going to have an extra set of hubs, axles, bearings, etc built so i could just take out the outr hinge pin but that will get old after a while i think. Especially if you are running 2 classes kind of close together.
#1575
Tech Fanatic
I left full foam in the rear and just radius them and cut about 1/4 in the fronts.