Duratrax Evader
#980
Tech Elite
iTrader: (61)
Evader DT is basicly a BX/EXB with a truck body.
IF the chassis is longer than a ST/EXT you may only need to get that besides body and SC wheels.
I did a STSC >> http://www.t3t4webservice.com/Duratrax_ST_SC.html
IF the chassis is longer than a ST/EXT you may only need to get that besides body and SC wheels.
I did a STSC >> http://www.t3t4webservice.com/Duratrax_ST_SC.html
#981
Been thinking of converting mine since I have a practically new and rare pro edition with all the graphite goodies plus B2 H-G diff mod. No way I could ever reclaim that investment selling it. The main obstacle is extending the wheelbase if you need to fit within class rules. If it's just for fun, just add the DT/BX parts. I have a list somewhere, but it's pretty easy to figure out by downloading the associated parts lists from duratrax and comparing.
#982
Tech Elite
iTrader: (61)
DT and EXT have the same chassis "DTXC6979", so that isn't an option to build a SC!!
===
IF you would want to do a build like I did, here is a source for metals, they offer "sheet sample packs" ($7.50 / $8.50 plus tax and shipping) that are sized 4 inch x 4 inch and in diff thicknesses. These would be enough to build many projects!!
They even offer CF!!!! :-)
http://www.onlinemetals.com/index.cfm?affiliate_id=416
===
IF you would want to do a build like I did, here is a source for metals, they offer "sheet sample packs" ($7.50 / $8.50 plus tax and shipping) that are sized 4 inch x 4 inch and in diff thicknesses. These would be enough to build many projects!!
They even offer CF!!!! :-)
http://www.onlinemetals.com/index.cfm?affiliate_id=416
#983
Tech Elite
iTrader: (28)
Got an Evader BX Pro for sale...
and ST Pro will also be going on sale within the next couple of days as well. Check out my thread if any of you folks are interested.
http://www.rctech.net/forum/r-c-item...ro-extras.html
and ST Pro will also be going on sale within the next couple of days as well. Check out my thread if any of you folks are interested.
http://www.rctech.net/forum/r-c-item...ro-extras.html
#984
Selling my Evader roller. It's in excellent shape. Very few scratches on the bottom on the chassis and body is in great shape too. Stripped the tranny gear. Bearings throughout. Have some new parts in packages too.
PM me if you're interested. Thanks
PM me if you're interested. Thanks
#985
Tech Initiate
iTrader: (1)
Finally got the brushless upgrade done on my Evader Bx!
The parts list:
Duratrax steel idler gear.
Duratrax cvd drives. (Nitro Evader Bx)
Tekin Redline 8.5T motor, geared 15T 88T.
Turnigy TrackStar 60A 1/10 scale ESC.
Reedy 3200mah lipo.
The result = Wheelies!
Also, not uncontrollably fast, and the motor and ESC barely got above ambient temp during my ~5min romp around the alley behind my place! I'm thinking about stepping the gearing up to 23T 88T to get a tad more speed; anyone think that's a bad idea?
The parts list:
Duratrax steel idler gear.
Duratrax cvd drives. (Nitro Evader Bx)
Tekin Redline 8.5T motor, geared 15T 88T.
Turnigy TrackStar 60A 1/10 scale ESC.
Reedy 3200mah lipo.
The result = Wheelies!
Also, not uncontrollably fast, and the motor and ESC barely got above ambient temp during my ~5min romp around the alley behind my place! I'm thinking about stepping the gearing up to 23T 88T to get a tad more speed; anyone think that's a bad idea?
#986
Tech Elite
iTrader: (28)
Selling my Evader ST Pro READY TO RUN for you folks who might be interested in one.
http://www.rctech.net/forum/r-c-item...ml#post9104356
http://www.rctech.net/forum/r-c-item...ml#post9104356
#988
im back
Hello all, just wanted to say im back in the hobby and that im still the proud owner of my Evader ST Pro from when i started this thread and i love it every single time i use it... For those that supported the thread with tips and tricks i just want to say thank you and for those that laughed at me for starting this thread i just want to say up yours and look at this thread 66 pages and still going, not to shabby. thank you again and keep up the good work.
#989
Anybody still around here? lol
#990
Tech Adept
iTrader: (7)
There are still some out here. Don't think I have posted on here use more as a source of info, Thanks to all who have had input. Vader was first electric and have just got rid of last nitro since being converted.
While I'm here what is the lowest turn brushless the gearbox with metal idler can handle.
While I'm here what is the lowest turn brushless the gearbox with metal idler can handle.