KARZ Calgary
Tech Elite
iTrader: (26)
Is it because I'm viewing on an iPhone?
None of them are bold as far as I can see.
R/C Tech Elite Member
iTrader: (10)
Tech Elite
iTrader: (26)
You need to setup a profile and log in Stu before you can sign up
NO
Stu, we have been running buggy all season long over at RCGears!!!
That being said, we WILL be letting everyone know of when indoor off road commences.
As we all know mother nature is having a sick sense of humor this week, we will be doing our best to please everyone, we will not accomplish this, but we will TRY!
Last edited by draggerdude; 09-10-2014 at 08:56 PM.
Hey Cal. Any chance of some Hobbywing V3 1s setup assistance?
Needed for Saskatoon WCICS. I don't have a clue with these things.
Needed for Saskatoon WCICS. I don't have a clue with these things.
Sure... Blinky or Boost. If you set Turbo and Boost it automatically goes in blinky mode.
Yes the V3 Esc's have the Boost and Blinky built into the 3.1 Firmware. Hobbywing just released some new software version 3.2. But this software bricked some esc's, including my brand new one. I wouldn't reccomend updating this close to the race as you won't have time to send it in for a warrenty replacement.
If you set boost and turbo to 0 the Esc will be in blinky mode. The button will blink in neutral. If it doesn't blink then you need to recalibrate the radio to get the right neutral zone.
If you set boost and turbo to 0 the Esc will be in blinky mode. The button will blink in neutral. If it doesn't blink then you need to recalibrate the radio to get the right neutral zone.
Ok. Thanks Cal. I might be able to do it then, I have a programme box.
R/C Tech Elite Member
iTrader: (10)
RACING! SATURDAY! SIGN UP!
Yes the V3 Esc's have the Boost and Blinky built into the 3.1 Firmware. Hobbywing just released some new software version 3.2. But this software bricked some esc's, including my brand new one. I wouldn't reccomend updating this close to the race as you won't have time to send it in for a warrenty replacement.
If you set boost and turbo to 0 the Esc will be in blinky mode. The button will blink in neutral. If it doesn't blink then you need to recalibrate the radio to get the right neutral zone.
If you set boost and turbo to 0 the Esc will be in blinky mode. The button will blink in neutral. If it doesn't blink then you need to recalibrate the radio to get the right neutral zone.
Cal. I've pluged the ESC into the programme box. All I get on the screen is "connecting to ESC" that's it. Whats the next step? Update the programme box?
Kev call me 403-279-5052
My guess is that you unplugged the ESC from your receiver and into the box instead of plugging in the box into the fan port OR you have the wrong older firmware on the programming box
My guess is that you unplugged the ESC from your receiver and into the box instead of plugging in the box into the fan port OR you have the wrong older firmware on the programming box
Last edited by Madulla; 09-12-2014 at 06:11 PM.
GOT IT
Thanks Cal.
Thanks Cal.
R/C Tech Elite Member
iTrader: (10)
In case anyone's looking for a KARZ transponder, or an RC4...http://www.rctech.net/forum/13540669-post9086.html