Tamiya TRF416 / TRF416WE / TRF416X
#7066
Tech Initiate
HY Everyone,
I need the circled thing's item number.
[IMG]http ://images.netbag.hu/20091114/18083031494.jpg[/IMG]
(I'm not allowed to post links because i don't have enough post.Just delete the unneeded SPACE character after the http)
If i'm right that is a cooling thing for the motor,fresh air cames from under the car chassis and it is cooling the motor,so if someone knows the item number please tell me!
Thanks
I need the circled thing's item number.
[IMG]http ://images.netbag.hu/20091114/18083031494.jpg[/IMG]
(I'm not allowed to post links because i don't have enough post.Just delete the unneeded SPACE character after the http)
If i'm right that is a cooling thing for the motor,fresh air cames from under the car chassis and it is cooling the motor,so if someone knows the item number please tell me!
Thanks
#7068
Tech Elite
iTrader: (85)
HY Everyone,
I need the circled thing's item number.
[IMG]http ://images.netbag.hu/20091114/18083031494.jpg[/IMG]
(I'm not allowed to post links because i don't have enough post.Just delete the unneeded SPACE character after the http)
If i'm right that is a cooling thing for the motor,fresh air cames from under the car chassis and it is cooling the motor,so if someone knows the item number please tell me!
Thanks
I need the circled thing's item number.
[IMG]http ://images.netbag.hu/20091114/18083031494.jpg[/IMG]
(I'm not allowed to post links because i don't have enough post.Just delete the unneeded SPACE character after the http)
If i'm right that is a cooling thing for the motor,fresh air cames from under the car chassis and it is cooling the motor,so if someone knows the item number please tell me!
Thanks
#7069
Tech Initiate
Thanks, That's it.
I was searching it for days but i didn't find a page where can i chechk all the parts and hop ups for the 416.
What do you think about this Air Duct?
Worth it?
Will my motor run cooler actually?
I was searching it for days but i didn't find a page where can i chechk all the parts and hop ups for the 416.
What do you think about this Air Duct?
Worth it?
Will my motor run cooler actually?
#7071
adding more shims to steering pushes the steering rods to forward = more parallel links=more twitchy car
that's right isn't it?
I don't like ultra responsive twitchy car, my xray is so easy to drive and very forgiving with 3th ankerman position which is angled...
5.5mm shims sounds a bit too much to me how many mm you guys recommend ??
thanx for all answers&advices
that's right isn't it?
I don't like ultra responsive twitchy car, my xray is so easy to drive and very forgiving with 3th ankerman position which is angled...
5.5mm shims sounds a bit too much to me how many mm you guys recommend ??
thanx for all answers&advices
#7072
for indoors i run 4mm because it settles the steering a little
outdoors i run 5mm or 5.5mm bepending of grip and amount of steering i have/need
outdoors i run 5mm or 5.5mm bepending of grip and amount of steering i have/need
#7073
cheers Mate
#7074
when the 416X available?
#7075
Tech Elite
iTrader: (138)
i used 44's all summer long outside with no problems
then i went indoors and at tthe first race meeting i broke 3 spool outdrives before i realised i needed 46's
i will always use 46's now but i feel that sometimes on full lock they tend to tie the car up , i am now using 1C 1C front not 1D 1D i was using so maybe i will be ok with 44's
then i went indoors and at tthe first race meeting i broke 3 spool outdrives before i realised i needed 46's
i will always use 46's now but i feel that sometimes on full lock they tend to tie the car up , i am now using 1C 1C front not 1D 1D i was using so maybe i will be ok with 44's
I broke one last week with the 44mm bone indoors
after a hard hit.
#7077
#7078
Tech Lord
iTrader: (32)
Are there any tracks near Oceanside? I grew up in Carlsbad, used to race at Hot Trick & E&L back in the day.
#7079
Tech Fanatic
iTrader: (108)
I'm looking at getting a 416X next month since I just sold my Evo 5 MS but I do have a question. Can you flip the drive train/belts left to right and right to left like on the TC5 and XRay to better balance the chassis? I assume you could only if you run a spool up front.
Last edited by swimbikerun; 11-15-2009 at 04:39 PM.
#7080
Tech Champion
iTrader: (38)
I'm looking at getting a 416X next month since I just sold my Evo 5 MS but I do have a quesion. Can you flip the drive train/belts left to right and right to left like on the TC5 and XRay to better balance the chassis? I assume you could only if you run a spool up front.