Tamiya F104 Pro!
#8972
Tech Elite
iTrader: (3)
http://www.tqrcracing.com/shop/produ....asp?p_id=2847
http://www.tqrcracing.com/shop/produ....asp?p_id=2954
#8973
I use shoo-goo and no screws for side pods
#8976
1°, 1,5°, 2° and 2,5° (4 different settings possible).
#8977
There is another brand on tqracing that have them as well with 0.5, 1,1.5, 2. Degrees.
I drove my car yesterday and what a blast it is.later on we got some light rain and i still drove it through the light rain and that was funny as hell with a 17.5
Have some small issues and looking g for some input. The car pushes on power, the pitch damper has 30 oil and 20 on the side one 4000 lipo towards the rear position. Im getti g ready to order some more goodies and wondering if the small spacer to run the spur is all i need to run 64 or 48 pitch?
I drove my car yesterday and what a blast it is.later on we got some light rain and i still drove it through the light rain and that was funny as hell with a 17.5
Have some small issues and looking g for some input. The car pushes on power, the pitch damper has 30 oil and 20 on the side one 4000 lipo towards the rear position. Im getti g ready to order some more goodies and wondering if the small spacer to run the spur is all i need to run 64 or 48 pitch?
#8978
Have some small issues and looking g for some input. The car pushes on power, the pitch damper has 30 oil and 20 on the side one 4000 lipo towards the rear position. Im getti g ready to order some more goodies and wondering if the small spacer to run the spur is all i need to run 64 or 48 pitch?
#8979
Im running it on a low to medium bumpy asphalt big track will placing the lipo towards the front be a wise idea and put the esc right under to damper mount? Sort of trying to figure out how to clean up the wiring.
#8981
Cool ill switch to 64 or 48 so i can use my spare gears. Everything is stock, but now that you mention it the front is low enough not to drag, but the back is way high after i installed the aluminum motor mount.
Im running it on a low to medium bumpy asphalt big track will placing the lipo towards the front be a wise idea and put the esc right under to damper mount? Sort of trying to figure out how to clean up the wiring.
Im running it on a low to medium bumpy asphalt big track will placing the lipo towards the front be a wise idea and put the esc right under to damper mount? Sort of trying to figure out how to clean up the wiring.
hope this helps
#8982
Tech Fanatic
I'm considering to sell all the original titanium plated aluminium parts of my F104X1.
If anybody is interested in the F104 X1 Alu parts just let me know with a Private Message, maybe when can work something out.
I live in europe, just keep that in mind.
Kind regards
If anybody is interested in the F104 X1 Alu parts just let me know with a Private Message, maybe when can work something out.
I live in europe, just keep that in mind.
Kind regards
#8983
#8984
C Clips
Does anybody know of a source for #19805478 2mm king pin c-clips? I'm thinking that I should find some.
Thanks, Terence
Thanks, Terence