Hyper TT 4wd 1/10th Truggy Thread
#3946
Tech Rookie
#3948
Tech Rookie
Thanks a lot :-) bought everything lastnight. I just want to purchased some new Springs as mine feel too soft. What would people recommend?
Thanks
Thanks
#3950
Tech Rookie
I thought I'd revive this thread. I've still got mine. I don't drive it a lot, but I've actually never broken anything on it (though I think I lost a rear dogbone once). I don't beat my cars quite like I used to, though. It's a pretty good quality machine. I just wish I had somewhere to race mine.
#3951
Anyone still playing this hyper TT?
Wanting to try 3s. But worry the stock.60am esc might not be able to handle.
Wanting to try 3s. But worry the stock.60am esc might not be able to handle.
#3952
Tech Rookie
I still have mine. Though I haven't been into RC nearly as much as I used to. But I'll be going to Aiken, SC for Thanksgiving and there's a nice track there so I'll be using it there (not actually racing, though).
#3953
Tech Adept
iTrader: (1)
I know this is an old thread but I think i made a mistake. I will be getting my Hyper 10TT on Monday along with quite a few STRC parts for it. I have read around that the Hyper 10TT is pretty much the same as the Hyper 10SC. So I also bought the STRC chassis braces but there made for the 10SC. Did i make a mistake and these braces arn't actually going to work on the 10TT?
#3954
Tech Adept
Join Date: Dec 2008
Location: universe, milkyway, solar system, planet blue, living on a big rolling stone
Posts: 104
hi everyone,
I'm searching some integy T8260 aluminum steering knuckles, if someone of you has some left or is knowing a local store who has them in stock, please contact me.
thanks in advance,
mike
I'm searching some integy T8260 aluminum steering knuckles, if someone of you has some left or is knowing a local store who has them in stock, please contact me.
thanks in advance,
mike
#3955
Tech Apprentice
anyone still running this kool tuggy
I bought one off ebay few months back really nice N a tough rig ..anyone know a good online place to get hop ups ??? Looked at all tha normal sites...
#3957
Tech Regular
iTrader: (8)
http://www.nitrohouse.com/
They sell nothing but OFNA
I had one but sold it but planning on buyang another one.
#3958
Tech Apprentice
I've been looking for a set of them myself...I look on integy site and found these Billet Machined Steering Knuckle for Hyper 10SC
Part num : T8260SILVER after reading stuff in this thread I guess u can use some of tha same parts frm tha hyper sc10 on tha 10tt so i got a pair they go on no problem ...
#3959
Tech Apprentice
Need help !!!
So I'm taken my diffs apart first time ever doing this with any RC so I bought some Udder butter from cow rc I also have some 3000 wt silicone diff fluid ....Question is what should I use for bashing around ???
#3960
Tech Apprentice
I actually have two of these that are highly hopped in with a lot of integy aluminum parts and also have some spare stuff. If anyone is interested PM me.