Xray XB4 thread
Tech Master
iTrader: (10)
Not sure if I bit off more than I can chew; I've been in the RC scene for a month and bought an Xray XB4 2017.
This thing is definitely durable, just sucks that their QC missed manufacturing one of my parts to the fullest. One of my two servo saver pivot shafts isn't threaded on one end so I'm only almost finished with my build.
LHS offered to thread it for me but seeing as how they aren't very local, I found a set on ebay. Xray never got back to me via email and it's impossible trying to join their forum.
This thing is definitely durable, just sucks that their QC missed manufacturing one of my parts to the fullest. One of my two servo saver pivot shafts isn't threaded on one end so I'm only almost finished with my build.
LHS offered to thread it for me but seeing as how they aren't very local, I found a set on ebay. Xray never got back to me via email and it's impossible trying to join their forum.
Tech Adept
iTrader: (10)
I am rebuilding some front ECS axels and I can't seem to find a parts list anywhere. a few of the parts are easy to identify but I just want to make sure I have the exact parts i need. I searched this thread and I believe the pins are 2x9. Do they make a rebuild kit or do I have to buy everything separate?
Team Tekin
iTrader: (18)
I am rebuilding some front ECS axels and I can't seem to find a parts list anywhere. a few of the parts are easy to identify but I just want to make sure I have the exact parts i need. I searched this thread and I believe the pins are 2x9. Do they make a rebuild kit or do I have to buy everything separate?
Front ECS Parts Break Down: https://www.teamxray.com/teamxray/pr...ria=0&catName=
Rear ECS Break Down: https://www.teamxray.com/teamxray/pr...ria=0&catName=
Tech Regular
iTrader: (1)
It doesn't seem like it's worth it to buy parts for those. The separate parts are so expensive.
Tech Adept
iTrader: (10)
It does appear that you will need to buy the parts separate.
Front ECS Parts Break Down: https://www.teamxray.com/teamxray/pr...ria=0&catName=
Rear ECS Break Down: https://www.teamxray.com/teamxray/pr...ria=0&catName=
Front ECS Parts Break Down: https://www.teamxray.com/teamxray/pr...ria=0&catName=
Rear ECS Break Down: https://www.teamxray.com/teamxray/pr...ria=0&catName=
I race on carpet so in between the jumps it is a perfectly flat/smooth floor. I think the ECS will be more beneficial for me even if the costs are high. Time will tell!
Tech Master
iTrader: (8)
Finally got my painted body back and looks sweet.
Tech Elite
iTrader: (27)
Tech Regular
iTrader: (6)
Looks cool , I have a question what different bodies will fit a 2016 xb4 ?
Tech Master
iTrader: (8)
Thanks...
I think for bodies only options are the Xray and JC one.
With the release of the AE (XB4 clone).... LOL
There's hope that some of those bodies might fit, since it seem like PL and JC will make several styles for AE cars, LOL
I think for bodies only options are the Xray and JC one.
With the release of the AE (XB4 clone).... LOL
There's hope that some of those bodies might fit, since it seem like PL and JC will make several styles for AE cars, LOL
Tech Master
iTrader: (10)
I like this idea! The stock AE body looks pretty sweet, and I like the JC S2 style as well
Tech Fanatic
iTrader: (7)
Nice job Bruno, I couldn't race today so I watched the eos race. Round 2 was ugly but the 1st/3rd legs were fast for Bruno especially the 3rd.
Tech Elite
iTrader: (27)
Question, the new 17 runs 12mm hexes, do the new wheels have the same offset as any of the other wheelers?
Tech Elite
iTrader: (149)
on the rear, without any spacers, the track width was slightly narrow. I purchased the avid 12mm hex spacers and added .5mm on each side which matched the stock offset of the xb4 with the stock wheels.
http://www.avidrc.com/product/5/acce...cessories.html
Tech Elite
iTrader: (27)
so coming from a 22-4, i wanted to use all my existing wheels. I did some measuring and noticed that from outside to outside on the front wheels of the 22-4 on the xray, they measure the same. inside to inside was a little off. 22-4 wheels are slightly wider.
on the rear, without any spacers, the track width was slightly narrow. I purchased the avid 12mm hex spacers and added .5mm on each side which matched the stock offset of the xb4 with the stock wheels.
http://www.avidrc.com/product/5/acce...cessories.html
on the rear, without any spacers, the track width was slightly narrow. I purchased the avid 12mm hex spacers and added .5mm on each side which matched the stock offset of the xb4 with the stock wheels.
http://www.avidrc.com/product/5/acce...cessories.html
Thanks