NitroXray80809

iTrader: (24)

My 14 when I gets stickers in it will look better but no to bad. I love this car they handle amazing the v2 and 14 both.

elex300

iTrader: (110)

I cut the spacer section off the rear. Do I also have to dremel the plastic section of the chassis that the gear box ledge rests on so everything can lay flat on the chassis. As it sits now it wont lay flat because it hits that piece.

seth556

iTrader: (43)

There's a carbon fiber shim that usually goes between the composite chassis and the gear box, when you run the gear box against the chassis you don't run the spacer. So you're really removing two spacers to do the mod.

elex300

iTrader: (110)

Got it. Thanks Seth.

Errokk

iTrader: (13)

Good lookin buggy!

Lonestar

iTrader: (14)

Hey guys, I know this is gonna sound odd... but has anyone fiddled something to run a front one-way on the xb4?

Thanks

Paul

BDRMBULLY

iTrader: (40)

Trying the rear tranny mod , hope i got it right lol
http://imageshack.us/a/img850/3006/t65x.jpg
If not guess theres no turning back
Tools , parts n car pic

joeymdz

iTrader: (13)

looks straight

BDRMBULLY

iTrader: (40)

I followed the contour of the back of what i cut off. Didnt think it had to be straight, tranny screws do that

joeymdz

iTrader: (13)

cool... now grind down the hangers and you are set

BDRMBULLY

iTrader: (40)

I ground down the rear hanger part that over hangs the chassis, the screws didnt want to go back in properly, am i suppose to grind down the entire flat spot that sits on the chassis so the screws go back in the rear hanger properly? And does the front rear hanger need filing as well?

HeavyD99

iTrader: (15)

You need to gently file the inner "rounded" edges of the RR Hanger to allow it to sit flat on the chassis. It does not require a lot of material to be removed. 7-8 passes each side with a decent file might do it. There should be no issue with screwing back down then.

The RF hanger does not need any modification.

Qwkrn U

iTrader: (133)

If you don't like simply, put the removed piece back under the great case and screw everything back together. It's totally reversable. The '14 spec car comes with the rear chassis piece already modified.

BDRMBULLY

iTrader: (40)

Mine went down without filing the inside, just filed the part below tge chassis so it doesnt get hitched up on the track
Thanks for the timely replies

V6Jim

Not on mine. I had to file the carrier to get it to fit. Easy job though.

Jimmy