Xray XB4 thread
#8776
Tech Adept
iTrader: (5)
A question before giving you advice.
Is this a new '14 kit your looking at or used? If it's new just hold off a few months and buy the 2016 kit that will have all the goodies you had to pay extra for on the 2015.
The 2014 car is saddle position only so no shorty setup and no the 2015 parts for this won't work on the 14 car. If it's a used 14, look out for worn out out drives and shafts and most importantly the slippers tightness. If the slipper is cranked down this will without a doubt prematurely wear the composite gears in the dif and cause the car to be undriveable and unbearable from the noise. They are relatively inexpensive to replace as far as xray parts go.
All of the xb4s are tanks. It is very hard to break the car. Parts are more expensive but rarely break. For example I've only broken a single front a arm on the car and that was only due to a tube having its stake literally hanging out on a track I was visiting. Easiest and fastest car to work on ever.
Is this a new '14 kit your looking at or used? If it's new just hold off a few months and buy the 2016 kit that will have all the goodies you had to pay extra for on the 2015.
The 2014 car is saddle position only so no shorty setup and no the 2015 parts for this won't work on the 14 car. If it's a used 14, look out for worn out out drives and shafts and most importantly the slippers tightness. If the slipper is cranked down this will without a doubt prematurely wear the composite gears in the dif and cause the car to be undriveable and unbearable from the noise. They are relatively inexpensive to replace as far as xray parts go.
All of the xb4s are tanks. It is very hard to break the car. Parts are more expensive but rarely break. For example I've only broken a single front a arm on the car and that was only due to a tube having its stake literally hanging out on a track I was visiting. Easiest and fastest car to work on ever.
Thanks for the information it is greatly appreciated
#8777
You can pickup used 2015 for like 250 and this is the best 4wd buggy!!in 1/10
#8779
Tech Fanatic
iTrader: (23)
New 3 pad slipper and the center shafts have changed lengths again. So I recon the slipper has moved forward 10-15mm. There is a foam spacer for the battery, so the battery may have been moved further forward too.
I hope the new bulkheads cover the holes in the bottom of the chassis properly now. I'm tired of seeing inside of the bulkhead full of dust/dirt.
I hope the new bulkheads cover the holes in the bottom of the chassis properly now. I'm tired of seeing inside of the bulkhead full of dust/dirt.
#8780
does anyone run the 60 mm tires on front? Did you trim sides of rim? I got wrong tires so want to use them..
Thanks
Thanks
#8781
Tech Addict
iTrader: (28)
New 3 pad slipper and the center shafts have changed lengths again. So I recon the slipper has moved forward 10-15mm. There is a foam spacer for the battery, so the battery may have been moved further forward too.
I hope the new bulkheads cover the holes in the bottom of the chassis properly now. I'm tired of seeing inside of the bulkhead full of dust/dirt.
I hope the new bulkheads cover the holes in the bottom of the chassis properly now. I'm tired of seeing inside of the bulkhead full of dust/dirt.
#8782
Tech Regular
#8783
Anyone hear any new news when the 16 is coming out? I really need a 4wd buggy
#8784
#8785
Tech Adept
iTrader: (7)
I did a quick forum search but couldn't find an answer. Are there any other US online retailers besides Amain.com and Absolute Hobbyz for Xray parts?
I am looking for an XRAY Steel Bevel Drive Gear (14T) (XRA365134) and they are out of stock on Amain.com. I also checked Ebay but they only have the composite gear.
It appears Absolute hobbyz has the part but their shipping is kind of high compared to Amain.com.
The LHS in the area don't carry XRAY due to the stipulations so that is why I am looking online.
Thanks,
I am looking for an XRAY Steel Bevel Drive Gear (14T) (XRA365134) and they are out of stock on Amain.com. I also checked Ebay but they only have the composite gear.
It appears Absolute hobbyz has the part but their shipping is kind of high compared to Amain.com.
The LHS in the area don't carry XRAY due to the stipulations so that is why I am looking online.
Thanks,
#8786
Try discountrc.com for parts
#8788
#8790
Sorry a2racing I was a little off.