Team Associated B6 & B6D thread
|
|||
#5251
Tech Apprentice
#5254
Tech Legend
iTrader: (294)
full info here:
http://www.rctech.net/forum/main-per...r-coupons.html
Cool thanks. That could be what I am looking for. I may also give the whole 1.8 rear piston thing a look.
http://www.rctech.net/forum/main-per...r-coupons.html
Cool thanks. That could be what I am looking for. I may also give the whole 1.8 rear piston thing a look.
#5258
Tech Regular
#5259
It's mainly limiting droop which does a number of things. It produces less chassis roll which is better for higher grip. It increases traction as well on higher grip surfaces but doesn't jump and land as well. The geometry of the car has a lot to do with how much droop is ideal and there are many options with this car because of the longer rear shock tower and shock body variations as well as gull wing and flat front arm options
#5260
Tech Rookie
Hey all,
I'm running an ecopower slingshot 17.5 motor in my B6D with a 31 pinion and 69 spur. Everyone at the track looked at me like I had 8 heads. I showed them the manual recommends this gearing. Saturday was the first time I ran this buggy. Am I insane or are others just out there? I should note they were all running different motors too (modified).
I'll be running it again tonight to check motor temps.
I'm running an ecopower slingshot 17.5 motor in my B6D with a 31 pinion and 69 spur. Everyone at the track looked at me like I had 8 heads. I showed them the manual recommends this gearing. Saturday was the first time I ran this buggy. Am I insane or are others just out there? I should note they were all running different motors too (modified).
I'll be running it again tonight to check motor temps.
#5261
#5262
Tech Apprentice
#5263
Tech Regular
A lot of people in my area have converted their B5m to a Sprint Car.
There might be one available for the B6D also. I'm stumped I don't know if I should build one of them or just buy a Custom Works outlaw 3. The Outlaw 3 kit is $440
There might be one available for the B6D also. I'm stumped I don't know if I should build one of them or just buy a Custom Works outlaw 3. The Outlaw 3 kit is $440
#5265
Tech Elite
iTrader: (89)
Join Date: Aug 2009
Location: " The World's Most Famous Beach "
Posts: 2,312
Trader Rating: 89 (100%+)
Sprint
I raced sprint cars on a banked oval clay track for 2 years. I had a dd Custom Works. I personally never cared for the conversions. It's just ahead start out of the box. Although I have no experience with the newer Associated B5/B6 platforms on ovals. Try to find a Used one.