Tamiya F104 Pro!
#977
Tech Rookie
#980
#981
Tech Rookie
hello
no body with a brushless 13.5T???
asphalt track,
no body with a brushless 13.5T???
asphalt track,
#982
Tech Fanatic
iTrader: (14)
here is a link to the manual and a blank set-up sheet.
http://www.petitrc.com/reglages/tami...amiyaF104.html
http://www.petitrc.com/reglages/tami...amiyaF104.html
#983
Tech Elite
iTrader: (2)
Ultimate F1 Series Day
This Saturday practice and Sunday Racing at the Tamiya track Southern California... Ultimate F1 Series Day Race... Two classes... foam silver can Mabuchi 540 J motor ONLY, no RPM limit.... and rubber tire, 17.5 brushless ONLY...
Three Rounds of racing...
Each round will be a 2 min qualifying period, 5 cars max on the track, your looking for one fist lap to determine your grid order... 8 min race...
We will do this three times... points given to the top 8 finishers... the winner will be determined by points at the end of the day...
For more rules and or info go to:
http://www.charleslightfoot.com/UF1SD.html
Three Rounds of racing...
Each round will be a 2 min qualifying period, 5 cars max on the track, your looking for one fist lap to determine your grid order... 8 min race...
We will do this three times... points given to the top 8 finishers... the winner will be determined by points at the end of the day...
For more rules and or info go to:
http://www.charleslightfoot.com/UF1SD.html
#985
SRBMOJO: awesome work on the cars. Those spindles are brilliant!
#986
Tech Fanatic
iTrader: (14)
fitting tires to wheels
I'm in the process of building my f104, but have a question around the tires and wheels fitting.
I've noticed that on the front wheels when I position the foams on the wheels that I have about 2-3mm of the inside of the wheel showing...is this right. The rear's appear to be the same as well
I would assume that the tires and wheels line up, but before I go taping up etc I just want to make sure I'm not making a rookie mistake.
I've noticed that on the front wheels when I position the foams on the wheels that I have about 2-3mm of the inside of the wheel showing...is this right. The rear's appear to be the same as well
I would assume that the tires and wheels line up, but before I go taping up etc I just want to make sure I'm not making a rookie mistake.
Last edited by aussierevo; 09-25-2009 at 07:20 PM. Reason: spelling
#987
Tech Elite
iTrader: (26)
I'm in the process of building my f104, but have a question around the tires and wheels fitting.
I've noticed that on the front wheels when I position the foams on the wheels that I have about 2-3mm of the inside of the wheel showing...is this right. The rear's appear to be the same as well
I would assume that the tires and wheels line up, but before I go taping up etc I just want to make sure I'm not making a rookie mistake.
I've noticed that on the front wheels when I position the foams on the wheels that I have about 2-3mm of the inside of the wheel showing...is this right. The rear's appear to be the same as well
I would assume that the tires and wheels line up, but before I go taping up etc I just want to make sure I'm not making a rookie mistake.
#988
Tech Rookie
A couple updated pics of mine....