JConcepts Thread
#8746
Any idea when a jcon. Silencer body will be available for the tlr 8 e 4.0
#8748
#8749
Tech Adept
Any plans for a finnisher body on the 22 3.0?
Have you guys also considered doing bodys for the yz2 and xb2 now that they have dirt editions for both?
Have you guys also considered doing bodys for the yz2 and xb2 now that they have dirt editions for both?
#8750
Yes; maybe later in the year when things settle down with the rapid changing chassis layouts.
#8751
Does JCon have any plans to do pre-mounts of the dirt webs in the softer compounds for SCT's 12mm.
#8752
PW, Has there been a change in the finish of the wheels? I purchased a set of 22-4 front wheels part#jco3327w and the finish is smooth gloss white. I also purchased a set of rears part#jco3326, the finish is more a dull satin white (with a slight blue tint). They definitely don't match. Is part#jco3326w more like the fronts? as far as the finish?
#8753
PW, Has there been a change in the finish of the wheels? I purchased a set of 22-4 front wheels part#jco3327w and the finish is smooth gloss white. I also purchased a set of rears part#jco3326, the finish is more a dull satin white (with a slight blue tint). They definitely don't match. Is part#jco3326w more like the fronts? as far as the finish?
#8754
Hi there,
Running 3d's a lot down here in Keilor & Knox in Australia. Any thoughts of a 3D 4wd front tyre?
Ben
Running 3d's a lot down here in Keilor & Knox in Australia. Any thoughts of a 3D 4wd front tyre?
Ben
#8755
#8756
#8757
chassis protector for tekno sct 410.3 ? or something that can be trimmed down besides clear?
#8758
#8759
I'm hesitant to move to 60mm. I'm not familiar with them and in our lower grip and bumpy environs. I'm not sure they'll be suited.
Have you done any testing with your drivers in Oz with the 60mm tyres?
#8760
will they make a rc8t3e truggy body ?