JConcepts Thread
#8761
Not me. The 60mm tyres have only just been approved down here I believe. Well I know they are fine from next year. Allowing everyone to transition.
I'm hesitant to move to 60mm. I'm not familiar with them and in our lower grip and bumpy environs. I'm not sure they'll be suited.
Have you done any testing with your drivers in Oz with the 60mm tyres?
I'm hesitant to move to 60mm. I'm not familiar with them and in our lower grip and bumpy environs. I'm not sure they'll be suited.
Have you done any testing with your drivers in Oz with the 60mm tyres?
will they make a rc8t3e truggy body ?
#8763
does anyone have a picture of a silencer body clearing the battery in an 8ight e 3.0 with the battery forward?
#8764
#8766
Or buy from RC bombshells with a garbage sticker for $10 a bottle.
#8767
Tech Fanatic
iTrader: (13)
https://www.calvetsupply.com/product...inary_Supplies
Or buy from RC bombshells with a garbage sticker for $10 a bottle.
Or buy from RC bombshells with a garbage sticker for $10 a bottle.
#8768
If I need to use Diesel, then I just use one of the old SXT bottles...
#8769
Tech Elite
iTrader: (4)
Not me. The 60mm tyres have only just been approved down here I believe. Well I know they are fine from next year. Allowing everyone to transition.
I'm hesitant to move to 60mm. I'm not familiar with them and in our lower grip and bumpy environs. I'm not sure they'll be suited.
Have you done any testing with your drivers in Oz with the 60mm tyres?
I'm hesitant to move to 60mm. I'm not familiar with them and in our lower grip and bumpy environs. I'm not sure they'll be suited.
Have you done any testing with your drivers in Oz with the 60mm tyres?
Ben, if the track is damp then use Double Dee 4wd fronts, if its grooved then Blue Bar codes are a good match. I have cut some rears down to make 3d fronts but generally prefer the feel of the bar codes.
I havent tried the Reflexes yet, but in general the 2.2" give better traction on our bumpier tracks than the 60mm. With 60mm only just becoming legal I havent tried the full range here.
Ray
#8770
Any eta on carbon shock towers?
#8771
Have the Metrix 1/8 tires been discontinued? Recommends for alternatives? TIA
They were probably the best tire at my local track that I've come across. The Crossbows are great too but the Metrix I could push harder...
They were probably the best tire at my local track that I've come across. The Crossbows are great too but the Metrix I could push harder...
#8772
Tech Adept
iTrader: (5)
I found a great container for applying that sauce! Get yourself a bottle of kiwi shoe polishing product like this. The top has a foam applicator with a push valve that only releases the product when pressure is applied. Doesn't leak and is amazing for applying no mess whatsoever. The top pulls off soo you can clean the shoe product out no problem.
image by aztomex, on Flickr
image by aztomex, on Flickr
#8773
I think they are still working on the alloy parts needed for the towers.
Unfortunately, it just wasn't a good seller, so I believe they are being discontinued. I would say the Cross Bow or Chasers would be the closest feel on the track.
Have the Metrix 1/8 tires been discontinued? Recommends for alternatives? TIA
They were probably the best tire at my local track that I've come across. The Crossbows are great too but the Metrix I could push harder...
They were probably the best tire at my local track that I've come across. The Crossbows are great too but the Metrix I could push harder...
#8775