NEW HOBBYWING STOCK SUPERCHARGED SOFTWARE
#9451
Rc Market Hong Kong does not stock the v3 from hobbywing .we follow all warranty codes so please don't get sucked in by false information like sold out on these websites and restocking coming soon.
thanks guys.
thanks guys.
#9452
I repeat Bullistorm brand is not a Hobbywing Oem Product it is a direct copy so please dont think when buying this product brand your buying a hobbywing product because your not
I get emails everyday asking the same questions
I get emails everyday asking the same questions
#9453
A big thanks to Angelo for a 5.5t setup that provided lots of power and driveability at my last race. Great service!
#9455
Dear Cobra.
Can I upgrade the SpeedPassion Cirtix Inspire 2.0 with the hobbywing Professional lcd box to same hobbywing compatible software?
King regards!
Can I upgrade the SpeedPassion Cirtix Inspire 2.0 with the hobbywing Professional lcd box to same hobbywing compatible software?
King regards!
#9456
Did you get the measurements for this please?
Also, can you explain why reverse doesn't work in the V3 firmware on a V2.1 ESC when the ESC is set to fwd/brk/rev, the drag brake is set to say 40, and the initial brake is set to drag brake - but reverse does work if initial brake isn't set to drag brake? This isn't just mine, another club member with the V2.1 xerun has the same problem.
Kev.
Also, can you explain why reverse doesn't work in the V3 firmware on a V2.1 ESC when the ESC is set to fwd/brk/rev, the drag brake is set to say 40, and the initial brake is set to drag brake - but reverse does work if initial brake isn't set to drag brake? This isn't just mine, another club member with the V2.1 xerun has the same problem.
Kev.
Hope this helps.
#9457
Tech Apprentice
If I set initial brake to = drag brake (in fwd/brk/rev mode), there is no reverse, but if I set initial brake to anything other than = drag brake, reverse works fine
#9458
[QUOTE=banquer;10928649]Dear Cobra.
Can I upgrade the SpeedPassion Cirtix Inspire 2.0 with the hobbywing Professional lcd box to same hobbywing compatible software?
King regards![/QUOTE
No you cannot as the cirtix is not manufactured by Hobbywing .
Can I upgrade the SpeedPassion Cirtix Inspire 2.0 with the hobbywing Professional lcd box to same hobbywing compatible software?
King regards![/QUOTE
No you cannot as the cirtix is not manufactured by Hobbywing .
#9459
#9460
Hello Friends
Just some information for the ones who dont know the new usb link software is for all hobbywing xerun products and the esc software and 2 in software will be written as below
120504 -v3
120215 -v2
120225-v1 etc
so then you guys are not confused which software needs to be used for which product .
The versions i have listed above dont exist they are just samples that im showing on the way it would be written etc
have fun guys any questions please feel free to email me either at [email protected] or [email protected]
Just some information for the ones who dont know the new usb link software is for all hobbywing xerun products and the esc software and 2 in software will be written as below
120504 -v3
120215 -v2
120225-v1 etc
so then you guys are not confused which software needs to be used for which product .
The versions i have listed above dont exist they are just samples that im showing on the way it would be written etc
have fun guys any questions please feel free to email me either at [email protected] or [email protected]
#9461
Tech Adept
I just want to say a big Thank you to Angelo for all the help that he gives for the hobbywing products. Keep up the good work !!!
#9462
Tech Elite
iTrader: (10)
Cobra,
The on off button is the best in the market right now. However it would be better if the it would take 3secs holding the button to turn it off instead of a simple push. Some times worried accidents may turn off the esc.
Other than that the esc works great. I won the B main in a recent big race starting from 3rd position and despite huge challenge from great drivers in the main. The esc has so much potential as I've yet to explore it.
Looking forward to!
The on off button is the best in the market right now. However it would be better if the it would take 3secs holding the button to turn it off instead of a simple push. Some times worried accidents may turn off the esc.
Other than that the esc works great. I won the B main in a recent big race starting from 3rd position and despite huge challenge from great drivers in the main. The esc has so much potential as I've yet to explore it.
Looking forward to!