Kyosho VoneR Thread
#5431
Originally posted by UndrGrndRziztnz
What hop up parts are recomended to lighten up the V1rr? Ive been looking into Kawahara parts but I am not exactly sure what would actually make the car lighter. Ive also seen that Kyosho makes some titanium parts. Which ones would be helpful? I was thinking turnbuckles and titanium screws, but I'm not sure if Kyosho makes a screw set specifically for the RR. Any advice would be great. Thanks
What hop up parts are recomended to lighten up the V1rr? Ive been looking into Kawahara parts but I am not exactly sure what would actually make the car lighter. Ive also seen that Kyosho makes some titanium parts. Which ones would be helpful? I was thinking turnbuckles and titanium screws, but I'm not sure if Kyosho makes a screw set specifically for the RR. Any advice would be great. Thanks
#5432
Originally posted by Sydewynder
RCLover
Use a #4 or 3mm split lock washer to keep the caphead screw from backing out on the 2 speed. I would use one on the Centax also if you have one.
No mess from threadlock and you can take the screw out when you want.
RCLover
Use a #4 or 3mm split lock washer to keep the caphead screw from backing out on the 2 speed. I would use one on the Centax also if you have one.
No mess from threadlock and you can take the screw out when you want.
thank you...
#5433
Originally posted by RClover
what is a split lock washer? how does it look like? any pic to show?
thank you...
what is a split lock washer? how does it look like? any pic to show?
thank you...
#5434
Tech Elite
Thank you commander Data for the pic.
RCLover that is the lock washer in the pic.
RCLover that is the lock washer in the pic.
#5435
Tech Elite
Originally posted by HEYALIGNMENTGUY
Thanks and for those who give a Damn my PM box is empty
Thanks and for those who give a Damn my PM box is empty
#5436
i c....
Originally posted by Sydewynder
Thank you commander Data for the pic.
RCLover that is the lock washer in the pic.
Thank you commander Data for the pic.
RCLover that is the lock washer in the pic.
will try to look for one....
#5437
Tech Master
Originally posted by Sydewynder
I don't think so. Try again. h
I don't think so. Try again. h
Its all clear now
#5438
Tech Addict
http://www.kyosho.co.jp/main-e.html
chek it out, look at the main page, and look at the
?¡"Takuya Itou" at "International GP Touring Car Race"2002/11/20
does any1 know the results of this race?????
also, i have a quick question; how would one remove the nut that holds the flyweel onto the engine??i've tried using my glow plug wrench(i belive its the same size) but the sg shaft gets in the way so the wrench cant get a hold of the nut, any suggestions?
chek it out, look at the main page, and look at the
?¡"Takuya Itou" at "International GP Touring Car Race"2002/11/20
does any1 know the results of this race?????
also, i have a quick question; how would one remove the nut that holds the flyweel onto the engine??i've tried using my glow plug wrench(i belive its the same size) but the sg shaft gets in the way so the wrench cant get a hold of the nut, any suggestions?
Last edited by asd; 11-23-2002 at 08:57 PM.
#5439
Buy a new wrench....like a Hudy!!....unless Integy can do one cheaper!!
#5440
Originally posted by asd
. . . the sg shaft gets in the way so the wrench cant get a hold of the nut, any suggestions?
. . . the sg shaft gets in the way so the wrench cant get a hold of the nut, any suggestions?
#5441
Tech Master
Originally posted by asd
how would one remove the nut that holds the flyweel onto the engine??i've tried using my glow plug wrench(i belive its the same size) but the sg shaft gets in the way so the wrench cant get a hold of the nut, any suggestions?
how would one remove the nut that holds the flyweel onto the engine??i've tried using my glow plug wrench(i belive its the same size) but the sg shaft gets in the way so the wrench cant get a hold of the nut, any suggestions?
#5442
Tech Addict
ok, thxs guys
one more thing, i noticed that the front belt is really loose, should i use a 19tooth pulley instead of the 18toth pulley that is currently in there??
one more thing, i noticed that the front belt is really loose, should i use a 19tooth pulley instead of the 18toth pulley that is currently in there??
#5443
Tech Rookie
Are there Titanium pivot balls avaliable for the VoneRR?
#5444
Originally posted by UndrGrndRziztnz
Are there Titanium pivot balls avaliable for the VoneRR?
Are there Titanium pivot balls avaliable for the VoneRR?
#5445
Tech Addict
http://www.reckward.de/Kyosho_Racing/kyosho_racing.html
hey, chek this site out, u need to translate it though, it in german, go to altavista.com and goto web tools, and use translate, copy and paste the url and ur ready to go.
ther are some really nice chassis shots,
hey, chek this site out, u need to translate it though, it in german, go to altavista.com and goto web tools, and use translate, copy and paste the url and ur ready to go.
ther are some really nice chassis shots,