HPI Cup Racer 1M
#3335
bump for the price
#3337
$150 is a great deal, ...i have sold all my CR's. They were fun cars and pretty good for the price. In my opinion they'll still be sought after to some degree even another 10 years from now.
#3339
Looking to buy a cup racer. PM me with what you have. Thank you.
#3340
Tech Regular
iTrader: (5)
I found a great sensored motor for my CR. Been looking for one without a sensor sticking out of the endbell and power wires going in the wrong direction. Installation pics soon!
LOL I ended up getting that same battery when I put the 3s capable esc in my car!
Okay, I found one in my LiPo collection that will work, although it is a 3s... It fits and I think I'll rock it!
It's a Nano-tech 3300 mAh, 3s. I was planning to run my Traxxas VLX 3500kv system and ESC on it, but the motor is a tight fit, and the ESC is on the larger size.
3s 3300mAh LiPo
[URL=http://s1338.photobucket.com/user/byfung/media/RC%20General/DSC_8602_zps0bc6f838.jpg.html]
Too Much?
It's a Nano-tech 3300 mAh, 3s. I was planning to run my Traxxas VLX 3500kv system and ESC on it, but the motor is a tight fit, and the ESC is on the larger size.
3s 3300mAh LiPo
[URL=http://s1338.photobucket.com/user/byfung/media/RC%20General/DSC_8602_zps0bc6f838.jpg.html]
Too Much?
Last edited by firefoxussr; 09-13-2016 at 06:33 AM.
#3341
Nice. Check my albums page for my CR Rover Mini.
#3343
Tech Master
iTrader: (70)
I was able to find a CR with the Exotek chassis conversion (includes all the stock stuff, too). The body is pretty much done - but the pics show the vehicle to be in great shape.
Won't have it till Friday, so that kinda stinks.
But wanted to ask you guys that still have these, what Tamiya bodies work on these?? I jumped on ebay and there were some from TBG, TeamBlueGroove or something, but have never heard of them. Was hoping that a Tamiya mini body will fit.
Thanks in advance!
Won't have it till Friday, so that kinda stinks.
But wanted to ask you guys that still have these, what Tamiya bodies work on these?? I jumped on ebay and there were some from TBG, TeamBlueGroove or something, but have never heard of them. Was hoping that a Tamiya mini body will fit.
Thanks in advance!
#3344
#3345
Tech Regular
iTrader: (5)
I was able to find a CR with the Exotek chassis conversion (includes all the stock stuff, too). The body is pretty much done - but the pics show the vehicle to be in great shape.
Won't have it till Friday, so that kinda stinks.
But wanted to ask you guys that still have these, what Tamiya bodies work on these?? I jumped on ebay and there were some from TBG, TeamBlueGroove or something, but have never heard of them. Was hoping that a Tamiya mini body will fit.
Thanks in advance!
Won't have it till Friday, so that kinda stinks.
But wanted to ask you guys that still have these, what Tamiya bodies work on these?? I jumped on ebay and there were some from TBG, TeamBlueGroove or something, but have never heard of them. Was hoping that a Tamiya mini body will fit.
Thanks in advance!
What you get with the Cup is the flexibility to run any 210mm or 225mm wheelbase body made by HPI, Tamiya, ABC Hobby, Colt, aaand many 1/12th scale pancar bodies will fit too.
My advice is get something more exotic than a Mini Cooper because you have a more exotic chassis. HPI Lancia Stratos (which only fits on this chassis*), HPI Porsche 911, Blitz McLaren P1, Protoform PFM12, etc.
If you get bored with your CF Cup Racer, sell it to me!
*okay, technically if you have an Active Hobby A210SS / Ofna JL12e you could without any modification to the chassis.