F11972

iTrader: (18)

Does any one know of a buggy body that will fit this kit?

bigdintn

iTrader: (1)

do a search in this thread for rkhess he is the one who did it

iThinman

Oh, it's crazy short and suspect quality. :-).

+ YouTube Video

Yeah, lol, good day for the parts counter today.

1Fastpede

iTrader: (53)

Can anyone please recommend a good servo for the 10TT or a desired range in servo torque for it ?

thanks.

RsDrake77

iTrader: (88)

Hi tec 7955 I here the savox servos are good but haven't used them also hobbico has one that is like the 7955 but cheaperin price

hoousi

From savox i used the tg1258 but then put it in my 2wd, very good for 69$ with 0.08s, now using the 1271 from my 1/8 which is actually overkill until i buy another 1258 and swap it in. Cant beat thei price/quality ratio.

tedstryker

iTrader: (88)

friday no good for me....work gets in the way of everything....

QDRHRSE

iTrader: (515)

Has anybody played around with the diffs in these yet?

Arigato

iTrader: (1)

Yes...I took my whole car apart before I ran it. All 3 diffs had a little of some weird grease that wasn't even stuck to the gears. I put 5wt oil in the front and center and 2 in the rear. I put the set up posted on Nitrohouse's web site and it handles very well.

ndi_guy

iTrader: (32)

I was just wondering what everyone was running cell count wise. I just finished mine and took it outside for a minute with the stock 13t pinion, mmp, murfdogg 6.5, and a 4900mAh 2s lipo and was not impressed. The mmp is at factory settings btw. I know my Hyper 10sc is ballistic on 3s. Is that the way to go?

1Fastpede

iTrader: (53)

I just did the same.. however using the Nitrohouse set-up http://www.nitrohouse.com/a34/Hyper-...icle_info.html

on the front shock mounting it says #3 on tower and #2 on arm.. well i did it this way and the body does not fit. the shock bodies are hitting the body so it doesn't sit on post/mount correctly. what does everyone do to solve this issue?

QDRHRSE

iTrader: (515)

I run mine with the Castle 3800/ Sidewinder SCT. I have a 15T pinion on it and its very quick but not that fast. Its hard to explain. It can go from a stop to full speed in 20ft. For whatever reason my Hyper10SC is faster with the same combo (14T actually). I have a second one that I'm putting a Novak 6.5HV in. I guess we'll see how that works. I only run on 2 S. Despite the lack of speed it really moves around the track.

Yosh70

iTrader: (17)

Referring to the NH article on the Hyper TT setup, what are the ride height and droop numbers? They seem to have left those out.

tedstryker

iTrader: (88)

question if i wanna get more steering with diff oil does this look right..3,5,1

S/X Runner

iTrader: (37)

It depends what you are at now in the diffs. 3,7,2 should give you plenty of steering though.