BMI Racing Discussions
#6947
Tech Elite
iTrader: (11)
tc3 bmi problems
i am having probems with my tc3 bmi chasis i just got. the battery keeps falling out during races if i so much as tap a wall. i have put foam on my battery bar and tighten down the battery bar screws before every race but it still manages to fallout. does anyone have any ideas that might help my problem?
#6948
if you take a small flat file,file the radiused edges on the slots in each corner to drop the cells a little deeper.this will square the corner up on the cell slots.what is happening is the sides of the cells are hitting the corners of the slots and not allowing them to fully seat inside the slot.being that the edges are pre beveled,this will only take a few minutes.if you have any problems with this i can do them for you buddy
also make sure you are using the aluminum battery strap or something a bit more rigid than the plastic one.hope this helps.one way or another we will get your batteries to stay in your car buddy
also make sure you are using the aluminum battery strap or something a bit more rigid than the plastic one.hope this helps.one way or another we will get your batteries to stay in your car buddy
#6949
Jason, I noticed on the TC4 chassis that you have holes for the TC4 str'g rack, the TC3 rack and the NTC3 rack. What effect does each one have on str'g ? My guess is that the TC3 rack is the most aggressive.
Thanks.
Thanks.
#6951
tc3 batts problem
I was having the same problem. I did 2 things... ordered the BMI strap..wider and doesn't seem to allow the cells to shift sideways and ordered the FT battery spacer. This doesn't allow the batts to slip forward. Was a little mroe money... but worth it. I havn't had the problem since.
#6954
jag88,
the tc4 rack location is changed from stock for more usable ackerman positions.the tc3 rack is for those who like that feel better,and the front ntc3 rack position is for a no ackerman setting.the tc4 rack and the tc3 rack are going to be the most adjustable.the tc4 rack is mostly maintenece free so most like that.
as for thew battery strap,i do offer a battery strap for the tc3.i have been slacking on website updates. i will get it updated very soon.if anyone has any questions,feel free to call the shop.
the tc4 rack location is changed from stock for more usable ackerman positions.the tc3 rack is for those who like that feel better,and the front ntc3 rack position is for a no ackerman setting.the tc4 rack and the tc3 rack are going to be the most adjustable.the tc4 rack is mostly maintenece free so most like that.
as for thew battery strap,i do offer a battery strap for the tc3.i have been slacking on website updates. i will get it updated very soon.if anyone has any questions,feel free to call the shop.
#6956
Tech Champion
iTrader: (13)
Re: BMI Racing is expanding its product line!!!
Originally posted by protc3
hey guys,
just wanted to let you know that we will soon be carrying Keyence speed controls,Takeoff tires and various other products.we will be updating our website real soon reflecting this expantion.
I would like to thank Schumacher USA for there support.
Jason
hey guys,
just wanted to let you know that we will soon be carrying Keyence speed controls,Takeoff tires and various other products.we will be updating our website real soon reflecting this expantion.
I would like to thank Schumacher USA for there support.
Jason
-Korey
#6957
Tech Rookie
Is BMI going to make chassis for the X-Ray FK'05? If so, when and will it be made to accept 3700's?
#6959
Jason darling....
Check your e-mail at work in the morning!!! I just sent a CAD file over for you to look at
Wayne
Check your e-mail at work in the morning!!! I just sent a CAD file over for you to look at
Wayne
#6960
My dad just got back from meeting Sean (N4S) to pick up my TC4 chassis and all I have to say is WOW! The chassis looks great! Another excellent job by Jason. I'm going to start on it tonight and have it ready for practice on saturday and racing on sunday and then bringing it to the superior state race the following weekend.
Jason - thanks! That's top notch work, that is
Jason - thanks! That's top notch work, that is