BMI Racing Discussions
#4471
Jason, I'll be running the 350 chassis you did for me with the extra cutouts at the Mazda race next month. I'm looking forward to it.
#4473
Jason...
Do you have any t-shirts or decals?? I sure could use them!!!
-Wayne
Do you have any t-shirts or decals?? I sure could use them!!!
-Wayne
#4475
John,
I'll be running Tuesday night with the latest version. Last Tuesday was a big success, The car had more cornering speed then a non-t-bar car, and was still easy to drive. With all the speed I could carry I was able to roll out higher and the car was more efficient. The battery movement, t-bar thickness, shock oil, rear dampening, and front springs are more critical now. The chassis and rear end assebly are very rigid, just a slight change in rear dampening or a .002" change in t-bar thickness makes a difference. I'll post pics Wednesday and give an update.
-Wayne
I'll be running Tuesday night with the latest version. Last Tuesday was a big success, The car had more cornering speed then a non-t-bar car, and was still easy to drive. With all the speed I could carry I was able to roll out higher and the car was more efficient. The battery movement, t-bar thickness, shock oil, rear dampening, and front springs are more critical now. The chassis and rear end assebly are very rigid, just a slight change in rear dampening or a .002" change in t-bar thickness makes a difference. I'll post pics Wednesday and give an update.
-Wayne
#4476
Pit Board
That pit board above was custom designed and built by me. It is not a McMoney pit board. McMoney does some nice work though. His boars are 18x12 and mine are 20x14. I think he charges $60 plus shipping for his.
If...BIG IF... I make some for sale they will probably cost about the same as the McMoney boards. He does better custom graphics and he does nice turbo gfx faceplates (I don't do those). I can use several of the graphics similar to the board pictured above which is just a Mandel if you know what that is. I then can put a name and varios Logo's on the graphic. I print 13x19 borderless prints for my pit boards.
Drop me a PM if you are interested. It's still up in the air if I'll make any but I can at least keep any interested parties informed if I do.
If...BIG IF... I make some for sale they will probably cost about the same as the McMoney boards. He does better custom graphics and he does nice turbo gfx faceplates (I don't do those). I can use several of the graphics similar to the board pictured above which is just a Mandel if you know what that is. I then can put a name and varios Logo's on the graphic. I print 13x19 borderless prints for my pit boards.
Drop me a PM if you are interested. It's still up in the air if I'll make any but I can at least keep any interested parties informed if I do.
#4478
Ray...
Is there anything you don't have????
-Wayne
Is there anything you don't have????
-Wayne
#4480
Last edited by lmunno; 08-30-2004 at 02:17 PM.
#4481
Tech Elite
iTrader: (95)
BMI eTC3
Got the BMI eTC3 chassis Saturday afternoon (THANKS!) and ran it today. Car ran really well for being the first day on the new chassis and second day on a new car.
Looking forward to getting more track time on the car in the next several weeks.
When the L4 chassis is available let me know. I'd like to get one, especially if it's in time for the Halloween Classic in Cleveland.
Thanks again!
Blake
Looking forward to getting more track time on the car in the next several weeks.
When the L4 chassis is available let me know. I'd like to get one, especially if it's in time for the Halloween Classic in Cleveland.
Thanks again!
Blake
#4482
Tech Elite
iTrader: (2)
Originally posted by sg1
John,
I'll be running Tuesday night with the latest version. Last Tuesday was a big success, The car had more cornering speed then a non-t-bar car, and was still easy to drive. With all the speed I could carry I was able to roll out higher and the car was more efficient. The battery movement, t-bar thickness, shock oil, rear dampening, and front springs are more critical now. The chassis and rear end assebly are very rigid, just a slight change in rear dampening or a .002" change in t-bar thickness makes a difference. I'll post pics Wednesday and give an update.
-Wayne
John,
I'll be running Tuesday night with the latest version. Last Tuesday was a big success, The car had more cornering speed then a non-t-bar car, and was still easy to drive. With all the speed I could carry I was able to roll out higher and the car was more efficient. The battery movement, t-bar thickness, shock oil, rear dampening, and front springs are more critical now. The chassis and rear end assebly are very rigid, just a slight change in rear dampening or a .002" change in t-bar thickness makes a difference. I'll post pics Wednesday and give an update.
-Wayne
I run mod 1/12th in the winter, so generally around a 11 turn D6 with some nice GP3300's and a GM V8 ESC
John
#4483
Originally posted by protc3
neil,cant wait buddy.i wanna see how it goes.keep me posted dude.
neil,cant wait buddy.i wanna see how it goes.keep me posted dude.
#4484
Hey John...
I run stock and mod., usually 9 turn double geared 24-100 with 1.85 tires and we've been running the new epic stock 2 mag. motor (set up by TEAM SCREAM). I ran the same t-bar with these motors, a .064", with a green spring with 22 1/2 wt. oil. It looks like the only change needed was tires, I ran CRC grey rears and purple fronts in stock, and CRC pink or magenta rears and plaid or purple fronts. The shock angle has been changed and the way it mounts has been moved along with the stiffer chassis, I had to go to lighter dampening in the shock and in the dampening washers for the rear pod.
-Wayne
I run stock and mod., usually 9 turn double geared 24-100 with 1.85 tires and we've been running the new epic stock 2 mag. motor (set up by TEAM SCREAM). I ran the same t-bar with these motors, a .064", with a green spring with 22 1/2 wt. oil. It looks like the only change needed was tires, I ran CRC grey rears and purple fronts in stock, and CRC pink or magenta rears and plaid or purple fronts. The shock angle has been changed and the way it mounts has been moved along with the stiffer chassis, I had to go to lighter dampening in the shock and in the dampening washers for the rear pod.
-Wayne
#4485
Tech Elite
iTrader: (2)
Thanks Wayne for the info. I'm currently running a 12L3 but you've said that the 12L3 parts will fit on the BMI chassis. That's good to hear. I run the IRS rear axle and think it should work? I do not know what really changed from the 12L3 to 12L4, if you could fill me in than I would appreaciate it.
John
John