dodgeguy

iTrader: (208)

They have a new 35C hard case pack that looks really good on a graph they have in their forums.

I am not sure if it would fit the 008. I run the SMC 5000 offset with a PPD under tray. It works great this way!

I would give the new hard case a try for sure.

Customworksking

iTrader: (74)

Drew ran 104/37 foam @ indoor nats ..go to t2 008 setup's and have a look..

Goingfast

iTrader: (29)

Hi
I picked up the used 008 and it is very nice shape and well take care..
I have the new tekin RS pro and 17.5 motor brushless for power and 4000 lipo batteries.. the car is under weight and I like to see some pic of your car and that where do you guy put the extra lead weight at? thanks

treky11

fair enough, but I only race at a local club level and I doubt that I will see that much difference between a maxamps pack and a matched lip. I run a GTB with a 4.5R motor in mod, the car has so much power I doubt I will see a difference. I ran an orion 4800 up until now.

Do people really see that much of diffence between a pack like maxamps and a matched lipo with the setup / type racing that I am doing?

ckoetsch

iTrader: (18)

I'm looking into getting a touring car next month but there are alot of good cars and I have always raced offroad so I was hoping to get some input on what you guys like and don't like about the T2 008.

King of Bearing

iTrader: (1)

i know that my team will be probably breaking parts but i just want to know that i will not have to sit in the pits for 20-30 minutes trying to replace a set of belts. the track is a high traction indoor thack that i have never had a problem with rocks or anythying detting cought in the belts. i just want to pick up a durable, reliable car that i will want to run later after the race to have as a back-up, trans-am, or 17.5 car

nashrcracer

iTrader: (1)

41 to 42.5 roll out is what skeen and I were running 13.5 at your local track EA
show up every once and awhile and you might get to race and find that out. I'll probably be at the track the next 2 weeks getting some practice in for vegas.

EAMotorsports

iTrader: (79)

Hey Dumbdumb...I wasnt asking for Roll out...just spur size dillweed! Besides its hard to show up when its closed for the summer I am going to try and come out next weekend maybe if its open. Just let me know when you all will be there.

EA

goop

iTrader: (2)

a 104 spur is perfect for the 08 car to run 13.5

nashrcracer

iTrader: (1)

I run a 100 kimbro but not sure that will fit on the 008 might have to sand it like you did on my prs 84 at the pave nats. otherwise did prs come out with a new gear for the 008? in like 100 and 104? I thought I saw it on http://www.redrc.net

commander

iTrader: (4)

hey guys sorry if this has already been answered but just quickly, how are you guys getting around the 17.5 gearing and fitting aftermarket spurs to the '008, obviously to get the 55mm rollout etc. aftermarket spurs, which brands?

Thanks heaps!

EAMotorsports

iTrader: (79)

The only company that makes them right now specifically for the 008 in a smaller size are RW. You can get them at Nexusracing.net Also Xray makes them to 104 but that is not small enough for 17.5. You'll need in the 90-94 range for 17.5. Kimbrough fits as well but wont work unless you are running lipo due to the gear being so wide it will rub the battery badly.

EA

hanulec

iTrader: (28)

Your drive system ratio will drive your spur choice. When running the 1.7 / US drive style I just started using a 104T spur. Previously when running the 2.3?? / EU drive style I ran a 90, 92 or 94T spur.

serpvect

Hello all!

I'm going to order arm-reamers, while awaiting my Xray. Could you please specify what are the suspension pivot pins diameter in T2'008? Are they all the same in diam?

Thanks a lot!

ldp787

iTrader: (26)

3mm....