Xray T2'008
#1352
For starters you'll most likely need to go to a harder front and rear spring, decrease droop, go the a front diff and probably have to mess around with roll centers depending on track conditions.
#1353
Tech Addict
iTrader: (33)
t2 008
hey guys, im looking to buy a 008 and im kinda confused. The track i run at is a converted tennis court, with some kind of grey paint over the surface. Im running a crt.5 with rubber tires, and it hooks like a champ!. The guys running elect car are running foams and look to be sliding around. I have no idea what shore tire they are running. Im looking at the Rubber tire kit, But dont know if ill be running foams. if some one could point me in a direction i would appreciate it.
#1354
i have 007 with the following option parts added to it.
1. Aluminium Shock absorber
2. Aluminium steering blocks
3. Aluminium Caster (C Hubs) Blocks
4. Aluminium rear hubs (uprights)
5. 6 cell battery barce
6. carbon fibre motor guard
will i be able to trasnsfer all of the following option parts to the 008 without negatively affecting the suspension geometry of the car?
1. Aluminium Shock absorber
2. Aluminium steering blocks
3. Aluminium Caster (C Hubs) Blocks
4. Aluminium rear hubs (uprights)
5. 6 cell battery barce
6. carbon fibre motor guard
will i be able to trasnsfer all of the following option parts to the 008 without negatively affecting the suspension geometry of the car?
Last edited by RocketRacer; 08-05-2008 at 07:21 AM. Reason: change of question
#1355
i have 007 with the following option parts added to it.
1. Aluminium Shock absorber
2. Aluminium steering blocks
3. Aluminium Caster (C Hubs) Blocks
4. Aluminium rear hubs (uprights)
5. 6 cell battery barce
6. carbon fire motor gaurd
will i be able to trasnsfer all of the following option parts to the 008 without negatively affecting the suspension geometry of the car?
1. Aluminium Shock absorber
2. Aluminium steering blocks
3. Aluminium Caster (C Hubs) Blocks
4. Aluminium rear hubs (uprights)
5. 6 cell battery barce
6. carbon fire motor gaurd
will i be able to trasnsfer all of the following option parts to the 008 without negatively affecting the suspension geometry of the car?
#1356
Tech Elite
iTrader: (74)
hey guys, im looking to buy a 008 and im kinda confused. The track i run at is a converted tennis court, with some kind of grey paint over the surface. Im running a crt.5 with rubber tires, and it hooks like a champ!. The guys running elect car are running foams and look to be sliding around. I have no idea what shore tire they are running. Im looking at the Rubber tire kit, But dont know if ill be running foams. if some one could point me in a direction i would appreciate it.
#1358
#1360
what class are you running
#1362
Hi Guys
My Car has 1 degree outboard TOE But I've noticed 90% of the setup sheets has no outboard TOE....
Why is that?
Why many drivers prefer 0 Outboard Toe in>>>?<<<
My Car has 1 degree outboard TOE But I've noticed 90% of the setup sheets has no outboard TOE....
Why is that?
Why many drivers prefer 0 Outboard Toe in>>>?<<<
#1364
Either way, there is some grinding + shimming needed (unless you are comfortable hanging the pack way off of the chassis).
#1365