Xray X1 - Formula One Car
#2161
What would you suggest for lube on low to medium grip asphalt? On All but green carpet your diff as worked very well for me with couple of drops of dry lube but on asphalt it feels a bit less stable than a conventional ball diff resulting in slightly less oncsistant & slower laps.
#2162
What would you suggest for lube on low to medium grip asphalt? On All but green carpet your diff as worked very well for me with couple of drops of dry lube but on asphalt it feels a bit less stable than a conventional ball diff resulting in slightly less oncsistant & slower laps.
Dry fluid will make car a little temperamental...;-)
If you feel the car twitchy, you can start to use syrups.
Heavier the syrup more easier the car will become, start from 500K.
Remember, you don't have to "fill" the diff as touring one. 4 dabs of syrup on the internals are all you need.
Any issue you might have, just let me know
#2163
Dry fluid will make car a little temperamental...;-)
If you feel the car twitchy, you can start to use syrups.
Heavier the syrup more easier the car will become, start from 500K.
Remember, you don't have to "fill" the diff as touring one. 4 dabs of syrup on the internals are all you need.
Any issue you might have, just let me know
If you feel the car twitchy, you can start to use syrups.
Heavier the syrup more easier the car will become, start from 500K.
Remember, you don't have to "fill" the diff as touring one. 4 dabs of syrup on the internals are all you need.
Any issue you might have, just let me know
#2164
Sure. Mugen, Xray, Core are excellent in my experience
#2165
Tech Apprentice
this picture caught my intention, never bump on those thing before. extended shock ball joint (not sure what to call it though) maybe still prototype thingy.
#2166
Lot of guys are using this here in France. It gives more steering on and off power without compromising the rear grip. Very usefull tip !
#2167
#2170
Tech Regular
This is exactly the way I have had my car for 4 months now. Apart from the T4 standoff though - I have a 6 mm x 35mm generic standoff.
#2171
42mm total length with the shims
#2172
hmmm
#2174
Tech Apprentice
#2175
it's just a 38mm aluminium tube with 3mm thread and 2x2mm spacers.
It's all about weight transfer, it is way more reactive
It's all about weight transfer, it is way more reactive