Tamiya mini cooper
Tech Elite
iTrader: (7)
Join Date: Jun 2002
Location: Melbourne, Australia. Home of rc-mini.net
Posts: 3,549
Trader Rating: 7 (100%+)
Find out who this guy is...
Plus a whole lot more in the full story of the 2011 Australian Mini Nats.
on rc-mini.net
Plus a whole lot more in the full story of the 2011 Australian Mini Nats.
on rc-mini.net
The blue one is mine - being driven by a local here.
I'll let you guys figure out who can't get around the disc!
I'll let you guys figure out who can't get around the disc!
my mini Rat Rod
Here is my mini rat rod I painted....
I also dyed my rims...
I also dyed my rims...
911, on a mo6
I have been wondering if the HPI 911 would fit on my mo6, will the front deck lid clear the shock tower?
Tech Elite
does anyone know the part # for the shock shaft in the 54000 Mini shock set??? Damaged one in a collision and need a replacement.
Hi,...
I just bought a M05 after following this thread for a while.
I plan to enter a local race which only allows silver can motor.
What brushed esc would you recommend???
I have a Futaba MC330CR, which according to some, is not good enough.
What about Tamiya Teu-302 bk???
Or any other which you is 'competitive' enough???
Thanks.
I just bought a M05 after following this thread for a while.
I plan to enter a local race which only allows silver can motor.
What brushed esc would you recommend???
I have a Futaba MC330CR, which according to some, is not good enough.
What about Tamiya Teu-302 bk???
Or any other which you is 'competitive' enough???
Thanks.
hobbs, try Keyence, good batteries and Chevalier Turbo capacitor.
People said I was nuts to do it but I bought 2 of the duratrax sports esc's which are only $22 from tower. For the mini and the F1 that both run silvercans. They are working great and have been for quite a while with no problems. My high dollar esc's are sitting on the shelf. Silvercans don't hurt brushed esc's or anything else it seems.
Hi,...
I just bought a M05 after following this thread for a while.
I plan to enter a local race which only allows silver can motor.
What brushed esc would you recommend???
I have a Futaba MC330CR, which according to some, is not good enough.
What about Tamiya Teu-302 bk???
Or any other which you is 'competitive' enough???
Thanks.
I just bought a M05 after following this thread for a while.
I plan to enter a local race which only allows silver can motor.
What brushed esc would you recommend???
I have a Futaba MC330CR, which according to some, is not good enough.
What about Tamiya Teu-302 bk???
Or any other which you is 'competitive' enough???
Thanks.
What would be the benefit of using Tamiya 53570 - RC Clamp Type Alum Wheel Hub - 4mm ?
Tech Elite
iTrader: (7)
Join Date: Jun 2002
Location: Melbourne, Australia. Home of rc-mini.net
Posts: 3,549
Trader Rating: 7 (100%+)
It's not a question of whether to buy one or not, it's just a question of how many to get!
The new 225 mm Mini shell from Protoform.
The new 225 mm Mini shell from Protoform.
Tech Elite
Tech Elite
Hi,...
I just bought a M05 after following this thread for a while.
I plan to enter a local race which only allows silver can motor.
What brushed esc would you recommend???
I have a Futaba MC330CR, which according to some, is not good enough.
What about Tamiya Teu-302 bk???
Or any other which you is 'competitive' enough???
Thanks.
I just bought a M05 after following this thread for a while.
I plan to enter a local race which only allows silver can motor.
What brushed esc would you recommend???
I have a Futaba MC330CR, which according to some, is not good enough.
What about Tamiya Teu-302 bk???
Or any other which you is 'competitive' enough???
Thanks.
Tech Champion
iTrader: (30)