STOCK motor forum
#2311
Tech Elite
iTrader: (44)
James35 - the question is when.... If two years or more before we see it as a norm, across the board, that is my guess. I know we currently are seeing pockets in the US that are growing and others still watching... I also agree with you, get brushless down to a stock level so the new people can start with something that fun and reasonable.
#2313
Tech Master
iTrader: (1)
Originally Posted by bvoltz
James35 - the question is when.... If two years or more before we see it as a norm, across the board, that is my guess. I know we currently are seeing pockets in the US that are growing and others still watching... I also agree with you, get brushless down to a stock level so the new people can start with something that fun and reasonable.
#2314
Tech Elite
iTrader: (44)
Originally Posted by maxepower
Just announced today. Brushless will be allowed in modified for the one and only REEDY RACE O' !!!!! Of coarse it helps that Novak is one of the sponsors and don't forget Associated/LRP brushless system is also a sponsor!
#2317
do they make like motor spring kits, or something like that with all the motor tuning stuff in it?
#2320
Originally Posted by i_got_m8_4_$85
do they make like motor spring kits, or something like that with all the motor tuning stuff in it?
#2321
on last thing, everytime my motor comes off the track super hot i go down in pinion size,(i run a moster stock) im down to like a 22t and it still comes off really hot, one run the comm was pretty purple
#2322
Tech Addict
iTrader: (3)
Originally Posted by i_got_m8_4_$85
on last thing, everytime my motor comes off the track super hot i go down in pinion size,(i run a moster stock) im down to like a 22t and it still comes off really hot, one run the comm was pretty purple
hold the can to see how long you can hold it if you can get more then 3 seconds its not over hot anything under that is bad
you maybe using a 22 tooth pinion but whats the spur if you use a small spur and a small pinion your rollout will be high
most tracks ive raced on I use between 26 and 32 rollout for roar motors
you will want to use the gearchart rollout calc to find what works for you
here is a link http://www.gearchart.com/index.cfm?f...n=chart.create
#2323
Tech Fanatic
Anyone have a final drive for the co27 at SoCal? They told me about 6.3 to 6.5 but it was slow. I did not have my temp gun though so i really could not tell you how hot it was. i really have not run stock there before so i dont have anything to compare to gearing wise. I know i need to cut it and i have some Trinity xxx brushes i was going to put in. I really have no experience tuning stock motors so please let me know if i am off base.
#2324
Super Moderator
iTrader: (239)
Originally Posted by tcmerf
Anyone have a final drive for the co27 at SoCal? They told me about 6.3 to 6.5 but it was slow. I did not have my temp gun though so i really could not tell you how hot it was. i really have not run stock there before so i dont have anything to compare to gearing wise. I know i need to cut it and i have some Trinity xxx brushes i was going to put in. I really have no experience tuning stock motors so please let me know if i am off base.
#2325
Originally Posted by the_barbarian
if you dont have a temp gun do the finger test its rough but it works
hold the can to see how long you can hold it if you can get more then 3 seconds its not over hot anything under that is bad
you maybe using a 22 tooth pinion but whats the spur if you use a small spur and a small pinion your rollout will be high
most tracks ive raced on I use between 26 and 32 rollout for roar motors
you will want to use the gearchart rollout calc to find what works for you
here is a link http://www.gearchart.com/index.cfm?f...n=chart.create
hold the can to see how long you can hold it if you can get more then 3 seconds its not over hot anything under that is bad
you maybe using a 22 tooth pinion but whats the spur if you use a small spur and a small pinion your rollout will be high
most tracks ive raced on I use between 26 and 32 rollout for roar motors
you will want to use the gearchart rollout calc to find what works for you
here is a link http://www.gearchart.com/index.cfm?f...n=chart.create