Serpent 710
11-13-2004, 09:46 PM
Tech Addict
Re: Re: Pit Team
Originally posted by InitialD
Is that car yours?
Is that car yours?
11-13-2004, 09:56 PM
Originally posted by jfc_tech
one more thing...i noticed my steering percentage is different from left and right. left more than right but right is more steering. is my servo limiting it. i put 100% already...
one more thing...i noticed my steering percentage is different from left and right. left more than right but right is more steering. is my servo limiting it. i put 100% already...
Cut the metal (the stock rod linkage) down to 17 mm. Stock lenght of the rod linkage is 23 mm from tip to tip.
As for the plastic, trim the length of the ball cups. The picture attached shows the top one being the original (and uncut) and the bottom one is the one that was trimmed.
This combo gives the total length of the ball cups and rod linkage assembly as 39.5 mm instead of 44.5 mm as per the manual.
At neutral position, the steering servo horn is not in the center. It should be leaning forward slightly at neutral position with this linkage mod.
11-13-2004, 09:59 PM
Re: Re: Re: Pit Team
Originally posted by Brett.w
Yep it was taken at our big boys toys event you may notice not holes were cut it was just a spare body
Yep it was taken at our big boys toys event you may notice not holes were cut it was just a spare body
Ummm, you need to cut out cooling holes. Else with them touching the car like that, the engine will surely overheat.
11-13-2004, 10:49 PM
Re: Pit Team
Originally posted by Brett.w
Just a couple of pic of my new pit team
Just a couple of pic of my new pit team
Now thats apitcrew I could live with !!!
11-13-2004, 10:50 PM
Re: Re: Pit Team
Originally posted by Brett.w
These 2 aswell .I like your taste in pitcrews
11-14-2004, 12:02 AM
Tech Addict
Re: Re: Re: Re: Pit Team
Originally posted by InitialD
I bet you kept that shell !
Ummm, you need to cut out cooling holes. Else with them touching the car like that, the engine will surely overheat.
I bet you kept that shell !
Ummm, you need to cut out cooling holes. Else with them touching the car like that, the engine will surely overheat.
11-14-2004, 12:05 AM
Tech Addict
In N.Y.
Hey Rwisejr i will be in New York from the 29th to the 7th of dec is there any tracks to go look at and i need a hobby shop to buy engines and serpent parts, any around N.Y. area?
11-14-2004, 12:10 AM
Re: In N.Y.
Originally posted by Brett.w
Hey Rwisejr i will be in New York from the 29th to the 7th of dec is there any tracks to go look at and i need a hobby shop to buy engines and serpent parts, any around N.Y. area?
Hey Rwisejr i will be in New York from the 29th to the 7th of dec is there any tracks to go look at and i need a hobby shop to buy engines and serpent parts, any around N.Y. area?
11-14-2004, 12:13 AM
Re: Pit Team
Originally posted by Brett.w
Just a couple of pic of my new pit team
Just a couple of pic of my new pit team
11-14-2004, 12:15 AM
Re: Re: Pit Team
Originally posted by Sow&Steady
11-14-2004, 12:15 AM
Re: Re: Pit Team
Originally posted by Brett.w
11-14-2004, 12:18 AM
Originally posted by InitialD
Aiks ! No tax? Is that better than ebay like what Mark usually does?
Aiks ! No tax? Is that better than ebay like what Mark usually does?
11-14-2004, 12:28 AM
Originally posted by Sow&Steady
Listen, 6 bodyshells without tax is no good without the RRR that you chose to ignore and not bring.
Listen, 6 bodyshells without tax is no good without the RRR that you chose to ignore and not bring.
Aren't you coming down some time soon?
11-14-2004, 12:45 AM
Tech Addict
Re: Re: Re: Pit Team
Originally posted by Sow&Steady
Err, so when is the next race down in NZ?
Err, so when is the next race down in NZ?
Last edited by Brett.w; 11-14-2004 at 12:50 AM.
11-14-2004, 12:50 AM
Tech Addict
The only serpent racer!
For all you wondering what i look like here it is me working hard on my beautifully prepared 710!