Ofna Ultra GTP2e
#1816
Tech Master
iTrader: (16)
some one please correct me if im wrong, i know DE Racing is a member on here.
I think these would work. the NEXX buggy uses a similar chassis.
http://www.deracing.net/store/index....&product_id=72
I think these would work. the NEXX buggy uses a similar chassis.
http://www.deracing.net/store/index....&product_id=72
#1817
some one please correct me if im wrong, i know DE Racing is a member on here.
I think these would work. the NEXX buggy uses a similar chassis.
http://www.deracing.net/store/index....&product_id=72
I think these would work. the NEXX buggy uses a similar chassis.
http://www.deracing.net/store/index....&product_id=72
Is that the same as for the jammin scrt10? I think I might have one around somewhere. Motivated to find it now. Thx
#1819
#1820
Tech Rookie
#1821
took my carbonfiber to the gills dirtoval/gtp out on a beautiful track today in Ohio , low and behold it ran like shit , granted im not a good driver or anything , but it def needs tweaking , and the rear 13mm shocks are too stiff in the rear
running my inferno gt2 after, that thing just gripped the track 10 times better then my ofna car and i used same tires off each car if I cant get this car setup , its gotta go and will put more thought and money into the car . I also need more time as this is my 2nd time out and 1st time this yr lol also ran this onroad slash scalpel body , dunno why but I be diggin it , looks cool on the track imo
running my inferno gt2 after, that thing just gripped the track 10 times better then my ofna car and i used same tires off each car if I cant get this car setup , its gotta go and will put more thought and money into the car . I also need more time as this is my 2nd time out and 1st time this yr lol also ran this onroad slash scalpel body , dunno why but I be diggin it , looks cool on the track imo
#1822
You dig it becuse the scalpel looks sick!! Cant wait to get out to that track i heard there was tons of traction!
#1824
hate taking my nice bodies to the track cuz every time I smack those boards the body doesnt look so nice anymore , granted it was my first time on the track this year so i should of known better then to use my brand new audi r8 body lol
here couple pics of not so new scalpel and couple other bodies I just got .. Also picked up a warrior body , alpha r3 , and 3 team C corvette bodies but they sure dont look like any corvette Ive ever seen , unless its a prototype lol
couple of buddies that race also have made some sick looking bodies using kysho gt decals
#1825
Tech Champion
iTrader: (17)
I finally got to play with mine a bit with no body on it. Its a right out of the box and only set ride height setup, but it sure is quick even with a 14 tooth pinion on the stock spur and stock tires. It'll be interesting with a 21 or 22 on it. I was pretty impressed by the way it handled. It didn't nose dive under braking, but braked very good with the HW 4068 and 150A ESC. Even with the stock tires, it handled pretty well on the dusty asphalt on my street. I'm hoping to get it all painted up next week and get some pre mounted Sweeps for it.
#1826
Nice looking bodies Flojo!
I just picked up one of these and need to get some pics up. It looks like it will be a lot of fun!
I just picked up one of these and need to get some pics up. It looks like it will be a lot of fun!
#1827
thanks Boostem , these bodies are becoming an obsession lol ,
Tried matte finish for the first time , dont wanna toot my own horn but I think i shocked my self lol
started around 6pm , cut the body out , washed inside , masked windows , made some cutsouts to mask headlight and tails .. that took all of 2 hours lol shot over to the LHS grabbed a can of ******* for the matte look . wash kind of scared to cut outside around the windows and headlights , but it worked , have to leave the windows and headlight still covered in protective wrap so the matte spray doesnt fog out everything .. took a little break but was alot later then 420
been cutting trim for the headlight and headlights , and stuck some clear yellow on inside of headlight , gonna call it a night for now .. btw this is a teamC body I bought on RCboys listed as a corvette , maybe the 2020 prototype verson lmao , anyhow figured id share some pics before I call it a night . hope u like it !! btw this new photobucket layout sucks , used to be nice when I could just put mouse over the pic and copy link grrr sorry for crappy iphone pics , doesnt so it justice , will get better ones , just debating if I should make the holes for my GT1 sp electric conversion or my ofna carbonfiber monster lol enjoy
Tried matte finish for the first time , dont wanna toot my own horn but I think i shocked my self lol
started around 6pm , cut the body out , washed inside , masked windows , made some cutsouts to mask headlight and tails .. that took all of 2 hours lol shot over to the LHS grabbed a can of ******* for the matte look . wash kind of scared to cut outside around the windows and headlights , but it worked , have to leave the windows and headlight still covered in protective wrap so the matte spray doesnt fog out everything .. took a little break but was alot later then 420
been cutting trim for the headlight and headlights , and stuck some clear yellow on inside of headlight , gonna call it a night for now .. btw this is a teamC body I bought on RCboys listed as a corvette , maybe the 2020 prototype verson lmao , anyhow figured id share some pics before I call it a night . hope u like it !! btw this new photobucket layout sucks , used to be nice when I could just put mouse over the pic and copy link grrr sorry for crappy iphone pics , doesnt so it justice , will get better ones , just debating if I should make the holes for my GT1 sp electric conversion or my ofna carbonfiber monster lol enjoy
#1828
On most cars this matte color hides the lines of such a nice car. To do it on a Jeep or off-road vehicle is ok, but on any sports car it probably makes the designers blood boil.