Serpent 710
03-19-2004, 03:13 AM
#6376
It feels more like a storm than a mere disturbance....
Its not a sepent... GET HIM!!!
Its not a sepent... GET HIM!!!
03-19-2004, 03:17 AM
#6377
Originally posted by BaxterC
It feels more like a storm than a mere disturbance....
Its not a sepent... GET HIM!!!
It feels more like a storm than a mere disturbance....
Its not a sepent... GET HIM!!!
03-19-2004, 03:19 AM
#6378
Originally posted by crashed_1
Are you sure your eyes are not playing tricks on you?....
Are you sure your eyes are not playing tricks on you?....
03-19-2004, 04:26 AM
#6379
Originally posted by crashed_1
Are you sure your eyes are not playing tricks on you?....
Are you sure your eyes are not playing tricks on you?....
j/k
03-19-2004, 04:28 AM
#6380
Originally posted by BaxterC
What did you order? I ordered the stainless steel brakedisk and the racing brake pads. I wanted to order the spring steel drive train stuff but it is a little pricey at the moment
What did you order? I ordered the stainless steel brakedisk and the racing brake pads. I wanted to order the spring steel drive train stuff but it is a little pricey at the moment
the words "Darkside" "Vision" and "Clouded" spring to mind! I've got a load of Ti screws on order aswell as some springs and some stuff for my Surikarn.
03-19-2004, 04:37 AM
#6381
Originally posted by markp27
Can't remember the words "Darkside" "Vision" and "Clouded" spring to mind!
I've got a load of Ti screws on order aswell as some springs and some stuff for my Surikarn.
Can't remember
the words "Darkside" "Vision" and "Clouded" spring to mind! I've got a load of Ti screws on order aswell as some springs and some stuff for my Surikarn.
Sweet... I cant afford to get Ti screws now so I will have to wait a little... I want to get the car first. I am worried I will order all the little thing, but then when I place the order for the car, I can afford it and will have to wait another month.
03-19-2004, 05:16 AM
#6383
Originally posted by clmbia45
Julius, are they worn down evenly, so both front and rear are @56mm at the end? What do you think about a little higher OD ratio, say 0.5mm larger front tires? Thanks.
Julius, are they worn down evenly, so both front and rear are @56mm at the end? What do you think about a little higher OD ratio, say 0.5mm larger front tires? Thanks.
With same size tires on the 710 you have a little overdrive. If you use more overdrive the turn in (using a one way) is better as the fronts try to slow the car when you get off throttle. Out of corners you will most likely get a little more stability/push than with a 1:1 ratio. Because of the tendency to get oversteer into corners a large front overdrive does not work on slippery tracks. Than you will be better of using a front diff for stability.
In very tight twisty tracks an overdrive might be helpfull. We'll see if a 21 pulley is a worthwile option.
There are no plans yet so no need to ask for release dates
03-19-2004, 05:39 AM
#6385
Hey there guys... have a look at this... it is one of the tracks I will be racing at....
http://www.mytsn.com/publ/publmem.asp?pid=2408
http://www.mytsn.com/publ/publmem.asp?pid=2408
03-19-2004, 05:44 AM
#6386
Originally posted by BaxterC
Hey there guys... have a look at this... it is one of the tracks I will be racing at....
http://www.mytsn.com/publ/publmem.asp?pid=2408
Hey there guys... have a look at this... it is one of the tracks I will be racing at....
http://www.mytsn.com/publ/publmem.asp?pid=2408
Nice track BTW
03-19-2004, 05:49 AM
#6387
And here
http://www.mytsn.com/tracks/track.asp?cid=140
I will post all my podium finish photos.
I will post all the pics of building, from start to finish, to running the engine in to racing...
http://www.mytsn.com/tracks/track.asp?cid=140
I will post all my podium finish photos.
I will post all the pics of building, from start to finish, to running the engine in to racing...
03-19-2004, 05:57 AM
#6388
What would I do if I dont have a mechanic to refuel my car... where would I get one from... I work too long and hard to have friends... I wonder if I can get my Girlfriend to do it...
03-19-2004, 06:26 AM
#6389
03-19-2004, 06:36 AM
#6390
Originally posted by BaxterC
What would I do if I dont have a mechanic to refuel my car... where would I get one from... I work too long and hard to have friends... I wonder if I can get my Girlfriend to do it...
What would I do if I dont have a mechanic to refuel my car... where would I get one from... I work too long and hard to have friends... I wonder if I can get my Girlfriend to do it...
Ask Lord D and myself - never, ever get Girlfriends involved - never even let them know you've got a car! 
And if they do find out, make sure they only see one of your cars at the same time! You can get into big trouble!!The great thing is - all cars look alike to girlfriends, so if you're clever, you can have quite a collection and they'd never know
Ask D, he'll give you some good hints at "car-hiding"
Other than that, you'll get to know some guys at the track and they'll be able to help out on race days - on practice days you won't need much help in re-fuelling