tim fry

iTrader: (1)

What is the shock length and droop please?

Many thanks

EDWARD2003

iTrader: (8)

I’ll check on the damper length later.

checked - 90.70 mm from end to end.

Setup the center damper so there is 0.4~0.8mm of pod droop. When set correctly the pod should be perfectly flat, not sagging down or pointing up. Just flat.

antlockyer

Edward, who told you they were continuing to make parts?

clinttredway

iTrader: (8)

Looking for a spare/backup car, anyone have one for sale? or a NIB kit sitting around?

EDWARD2003

iTrader: (8)

The Yokomo designer himself. Yokomo still has a strong 1/12th presence in Japan, but other countries not so much.

Apex

iTrader: (51)

rcjaz out of Hong Kong appears to have them in stock.

Apex

iTrader: (51)

Is the mod setup sheet in the Starting Setup section on petitrc a good starting point for an YRX-12 2019 version? Also, what side springs come in the 2019 kit?

tim fry

iTrader: (1)

Silver side springs in the kit. Green is a popular choice and my go to spring

Apex

iTrader: (51)

What tires work on CRC Black carpet and for Grey Ozite for mod?

MattSheldon

Has there been any rumors of a new YRX12 or was the 19 the end of the line?

TOADYY

iTrader: (6)

I believe '19 is the last of the YRX12. Parts are still being made to my knowledge.

tony q

iTrader: (35)

we use contact or gravity tires on black carpet here in 702 rc raceway in Vegas

Greg M

iTrader: (8)

I'm new to 1/12 and have picked up a Yrx12. I can't find anyone with the rear bearing height adaptors (R12-20H) in stock and it seems Yokomo has none as well. Do any from another brand fit?

TOADYY

iTrader: (6)

Those are the same as the Associated height adapters so you use Xeon, CRC and etc.
This place has them in stock: https://www.framega.com/products/r12...-hight-adaptor

Greg M

iTrader: (8)

That's brilliant to know, I'll grab another brands.