View Poll Results: what's your tire choice?
Protoform
46
30.67%
HPI
104
69.33%
Voters: 150. You may not vote on this poll
U.S. Vintage Trans-Am Racing Part 2
#4876
Tech Champion
iTrader: (22)
Wow were gettin' started already.......
"Motor Specifications:
25.5 brushless with 2C LiPo: Novak SS25.5 Pro brushless motor (pn:3425V) Ballistic 25.5 (pn:3625V- stator only pn:S6625) Club (pn:3331) or Boss (pn:3626V) ONLY combined with any hard-cased 2C 7.4v LiPo pack up to and including 5000 mAh capacity. Novak motors are the ONLY motor allowed at this time. All house track rules regarding LiPo usage apply. Only physical motor timing advance is allowed, however Ballistic motors must not be advanced beyond the last line of the timing range sticker. 12.3 mm rotor diameter only (no "tuning" rotors are allowed, only stock Novak rotors allowed). Using ceramic bearings in the motor makes you a dork. No modifications or optional parts allowed on motor can, endbell, stator, or rotor, other than the Boss #5925 Ballistic 540 Vented Endbell/Bearing Racing Upgrade Kit (replacement) . No cooling holes or other changes allowed to motor. Fans and external clip on heatsinks are allowed, but integral type heatsinks/fans including but not limited to those that require motor disassembly to mount are illegal.
All decisions of the race promoter or track owner are final. "
http://www.usvintagetransam.com/rules/index.html
I put the "approved" sticker on the box and took the picture after we tested the motor last night. Everything was set up identically to the Ballistic motor in the test car and the lap time was .1 slower on hot lap!! A little timing adjustment and the car was exactly the same speed as the Ballistic. As it was mentioned, the motor ran about 10*F cooler, so we will allow the Novak vented endbell to be used on the other motors.
I really want to keep everything as close to the same as possible but obviously this will be the only motor manufactured going forward, so the endbell allowance is a natural to keep things even. Novak was good enough to warn us that this was coming and worked with us to ensure that the motors would as close as possible in performance to what we had, and I appreciate that. It looks like they have been able to get it right. Mucho thanks to them!
"Motor Specifications:
25.5 brushless with 2C LiPo: Novak SS25.5 Pro brushless motor (pn:3425V) Ballistic 25.5 (pn:3625V- stator only pn:S6625) Club (pn:3331) or Boss (pn:3626V) ONLY combined with any hard-cased 2C 7.4v LiPo pack up to and including 5000 mAh capacity. Novak motors are the ONLY motor allowed at this time. All house track rules regarding LiPo usage apply. Only physical motor timing advance is allowed, however Ballistic motors must not be advanced beyond the last line of the timing range sticker. 12.3 mm rotor diameter only (no "tuning" rotors are allowed, only stock Novak rotors allowed). Using ceramic bearings in the motor makes you a dork. No modifications or optional parts allowed on motor can, endbell, stator, or rotor, other than the Boss #5925 Ballistic 540 Vented Endbell/Bearing Racing Upgrade Kit (replacement) . No cooling holes or other changes allowed to motor. Fans and external clip on heatsinks are allowed, but integral type heatsinks/fans including but not limited to those that require motor disassembly to mount are illegal.
All decisions of the race promoter or track owner are final. "
http://www.usvintagetransam.com/rules/index.html
I put the "approved" sticker on the box and took the picture after we tested the motor last night. Everything was set up identically to the Ballistic motor in the test car and the lap time was .1 slower on hot lap!! A little timing adjustment and the car was exactly the same speed as the Ballistic. As it was mentioned, the motor ran about 10*F cooler, so we will allow the Novak vented endbell to be used on the other motors.
I really want to keep everything as close to the same as possible but obviously this will be the only motor manufactured going forward, so the endbell allowance is a natural to keep things even. Novak was good enough to warn us that this was coming and worked with us to ensure that the motors would as close as possible in performance to what we had, and I appreciate that. It looks like they have been able to get it right. Mucho thanks to them!
Last edited by robk; 07-10-2013 at 03:11 PM.
#4879
I don't believe so, the 3625 and 3625V have been discontinued.
http://teamnovak.com/shop/index.php?...products_id=79
The 3626 is it's replacement.
http://teamnovak.com/shop/index.php?...roducts_id=519
http://teamnovak.com/shop/index.php?...products_id=79
The 3626 is it's replacement.
http://teamnovak.com/shop/index.php?...roducts_id=519
#4880
Tech Addict
OK, kids...project is coming along...
Catch me on FaceBook (Jim McKinley, Canal Fulton, OH) or e-mail me at [email protected]. MY PM in-box will fill up too quickly here on HobbyTalk :P
Catch me on FaceBook (Jim McKinley, Canal Fulton, OH) or e-mail me at [email protected]. MY PM in-box will fill up too quickly here on HobbyTalk :P
#4881
Numbers
Hey All,
Can someone tell me where I can find the "Round Dot Number" decal/Stickers??
Can someone tell me where I can find the "Round Dot Number" decal/Stickers??
#4882
Tech Master
iTrader: (38)
Here's the thread...
http://www.rctech.net/forum/painting...am-decals.html
Last edited by cdwilliams1; 07-11-2013 at 01:15 PM. Reason: linked the thread
#4883
Send a PM to the user 'CSeils' he can print some up for you.
Here's the thread...
http://www.rctech.net/forum/painting...am-decals.html
Here's the thread...
http://www.rctech.net/forum/painting...am-decals.html
#4884
Tech Champion
iTrader: (2)
OK, kids...project is coming along...
Catch me on FaceBook (Jim McKinley, Canal Fulton, OH) or e-mail me at [email protected]. MY PM in-box will fill up too quickly here on HobbyTalk :P
Catch me on FaceBook (Jim McKinley, Canal Fulton, OH) or e-mail me at [email protected]. MY PM in-box will fill up too quickly here on HobbyTalk :P
#4885
Tech Addict
#4886
Tech Addict
Where can I find interiors/driver figures for a Pegasus Camaro body?
#4887
Suspended
iTrader: (16)
Hey guys need a lil help from my USVTA fellow racers
Please log in to or like fseara on Facebook or fseara .com and
http://fseara.com/Vote for the USVTA rules to be used in this Florida series
We need a bit of help from real Usvta racers .
Please help me keep USVTA strong hear in Florida
Thank you so much for all your help
Please log in to or like fseara on Facebook or fseara .com and
http://fseara.com/Vote for the USVTA rules to be used in this Florida series
We need a bit of help from real Usvta racers .
Please help me keep USVTA strong hear in Florida
Thank you so much for all your help
#4888
Hey guys need a lil help from my USVTA fellow racers
Please log in to or like fseara on Facebook or fseara .com and
http://fseara.com/Vote for the USVTA rules to be used in this Florida series
We need a bit of help from real Usvta racers .
Please help me keep USVTA strong hear in Florida
Thank you so much for all your help
Please log in to or like fseara on Facebook or fseara .com and
http://fseara.com/Vote for the USVTA rules to be used in this Florida series
We need a bit of help from real Usvta racers .
Please help me keep USVTA strong hear in Florida
Thank you so much for all your help
And for the whiners that complain about battery availability, there are a whole bunch of new reasonably priced 5000mah batteries available from several different manufacturers now. Many of them are marketed specifically as VTA packs and all of them good enough for use in a variety of classes beside just VTA. I have one of the new Trinity "Sting Extreme" packs and I love it. I haven't even run it in VTA yet, just USGT and it has been very competitive so far.
#4890
Tech Elite
iTrader: (115)
http://fseara.com/
SEE:
Which ruleset would you prefer for VTA?
From the homepage of the site, on the right side, there is an option to vote on either ROAR or USVTA rules. At the moment there is a 28% advantage (current voting results) to run ROAR rules. I run this class in Florida and like Pete, would like to see USVTA rules in place.
Here is a chance to make USVTA rules the standard for a long-standing series in the South East. Posting this up so that guys racing VTA in this area are aware of the vote (if they had not checked the Fseara website). Not sure how many on this thread race in Florida but it's a good way to get the message out to those that do.
SEE:
Which ruleset would you prefer for VTA?
From the homepage of the site, on the right side, there is an option to vote on either ROAR or USVTA rules. At the moment there is a 28% advantage (current voting results) to run ROAR rules. I run this class in Florida and like Pete, would like to see USVTA rules in place.
Here is a chance to make USVTA rules the standard for a long-standing series in the South East. Posting this up so that guys racing VTA in this area are aware of the vote (if they had not checked the Fseara website). Not sure how many on this thread race in Florida but it's a good way to get the message out to those that do.
Last edited by nf_ekt; 07-17-2013 at 08:58 AM.