Xray XB2 2WD Buggy Thread
|
|||
#857
Already been covered, they say no because of the clearance over the gear, Bentka used the yoke body for early prototypes but still not a good fit he stated...Another month or so and you will see more options, stock one looks good...
I'm curious about the dirt edition,if it will have a gear cover/ different body? Not every one races indoors, and will the body keep out small debris?
I'm curious about the dirt edition,if it will have a gear cover/ different body? Not every one races indoors, and will the body keep out small debris?
it have to be a litle trim on the front but no problem at the gear area at all!
i will post pictures with a marked body, how to cut!
#858
Already been covered, they say no because of the clearance over the gear, Bentka used the yoke body for early prototypes but still not a good fit he stated...Another month or so and you will see more options, stock one looks good...
I'm curious about the dirt edition,if it will have a gear cover/ different body? Not every one races indoors, and will the body keep out small debris?
I'm curious about the dirt edition,if it will have a gear cover/ different body? Not every one races indoors, and will the body keep out small debris?
We've raced outdoors for over a year not using a gear cover with the early bodies that covered less than the now stock body without issues.
You will have to cut the Yokomo body to sit higher in order to get it to clear the spur area.
The XB2 body is a much better fit (obviously), handles better on track and looks better IMO, so why you would want a YZ2 body on your XB2 I don't get
Bent
#859
XB2 Bodies?
Anyone know of a place in the USA where the XB2 Carpet Edition Bodies are in stock?
#860
#861
I sent my Body off to Painter and I am not sure I will get it back i time for the First Series race... #NotGood
#863
Tech Elite
iTrader: (33)
OK, so i have been working on a Wheel/adapter list.. going through this forum, and finding what people are doing.. i still need AKA, and TLR front offsets.. if anyone has that info..
Wheel/adapter
XRAY Front/ 0mm 365353 (STOCK)
XRAY Rear/ +2.25mm 365357 (STOCK)
AVID Front/ i believe it needs -1.5 each side, can someone confirm
AVID Rear/ +1.50 365356
SCHU Front/ 0mm 365353 (STOCK)
SCHU Rear/ +2.25mm 365357 (STOCK)
PL B4 Front/ i believe it needs -1.5 each side, can someone confirm
PL B4 Rear/ +1.50 365356
PL B5 Front/ -0.75mm 365354
PL B5 Rear/ +3.00 365358
AKA Front/
AKA Rear/ +1.50 365356, plus 0.75 wheel shim
TLR Front/
TLR Rear/ +1.50 365356, plus 0.75 wheel shim
anyone feel free to correct anything i have on here.. im just putting this info from other post on this thread.. nothing is confirmed..
If anyone has more information, please let me know. i been working on a sheet for this, and can create a PDF, to share with everyone if they want.
Wheel/adapter
XRAY Front/ 0mm 365353 (STOCK)
XRAY Rear/ +2.25mm 365357 (STOCK)
AVID Front/ i believe it needs -1.5 each side, can someone confirm
AVID Rear/ +1.50 365356
SCHU Front/ 0mm 365353 (STOCK)
SCHU Rear/ +2.25mm 365357 (STOCK)
PL B4 Front/ i believe it needs -1.5 each side, can someone confirm
PL B4 Rear/ +1.50 365356
PL B5 Front/ -0.75mm 365354
PL B5 Rear/ +3.00 365358
AKA Front/
AKA Rear/ +1.50 365356, plus 0.75 wheel shim
TLR Front/
TLR Rear/ +1.50 365356, plus 0.75 wheel shim
anyone feel free to correct anything i have on here.. im just putting this info from other post on this thread.. nothing is confirmed..
If anyone has more information, please let me know. i been working on a sheet for this, and can create a PDF, to share with everyone if they want.
Last edited by dgrobe2112; 01-04-2016 at 12:41 PM.
#864
The 2nd batch of XB2 Carpet Editions just arrived, so dealers will have them back in stock in the next few days. We also received the first batch of bodies with this shipment. As stated above, they did not ship with the initial batch of kits, so this is the first wave to hit the States.
- Bryan
- Bryan
#865
Tech Regular
The 2nd batch of XB2 Carpet Editions just arrived, so dealers will have them back in stock in the next few days. We also received the first batch of bodies with this shipment. As stated above, they did not ship with the initial batch of kits, so this is the first wave to hit the States.
- Bryan
- Bryan
#866
I wouldn't hold your breath on that one!
#867
Tech Regular
I'm not but would be super happy if it did
#868
For those who are interested, went back to the shock setup Brent suggest. Pretty dang good, definetly need just a little bit stiffer spring. Ordered 2 dot, should be money after that, I'll keep you posted.
1.6x2 500cst
1.7x2 32.5wt Associated
1dot all the way around
1.6x2 500cst
1.7x2 32.5wt Associated
1dot all the way around
#869
Dirt Edition will have a gear cover
We've raced outdoors for over a year not using a gear cover with the early bodies that covered less than the now stock body without issues.
You will have to cut the Yokomo body to sit higher in order to get it to clear the spur area.
The XB2 body is a much better fit (obviously), handles better on track and looks better IMO, so why you would want a YZ2 body on your XB2 I don't get
Bent
We've raced outdoors for over a year not using a gear cover with the early bodies that covered less than the now stock body without issues.
You will have to cut the Yokomo body to sit higher in order to get it to clear the spur area.
The XB2 body is a much better fit (obviously), handles better on track and looks better IMO, so why you would want a YZ2 body on your XB2 I don't get
Bent
my friend ordered one from europe and its cost for him $45 with shipping