Mugen MTX-3
11-10-2003, 03:21 PM
#8746
Tech Elite
iTrader: (4)
Join Date: Sep 2001
Location: Louisville, KY!.. USA!! ....Home of http://www.fastharry.com
Posts: 2,847
Trader Rating: 4 (100%+)
Originally posted by raffaelli
Carl introduced you to me at Edison one day. Thought you said you were good? I saw lots of broken plastic on your pit table..............................just kidding.
The Hobby Chamber is in West Haven , CT. It is an indoor blacktop track. Great facility. Smooth surface, nice people, good and fun racing. Nicely run and have the best grilled cheese and bacon sandwiches. I have been running there since September. I plan on being there all winter, and throw in some rally once in a while. The owner is George, give him a call, tell him I sent you 203-934-7317. They are having a 1500 Lap enduro in December with 10 4-man teams. They will run any class, electric or nitro that shows. Mainly the crowd has been nitro.
Carl introduced you to me at Edison one day. Thought you said you were good? I saw lots of broken plastic on your pit table..............................just kidding.
The Hobby Chamber is in West Haven , CT. It is an indoor blacktop track. Great facility. Smooth surface, nice people, good and fun racing. Nicely run and have the best grilled cheese and bacon sandwiches. I have been running there since September. I plan on being there all winter, and throw in some rally once in a while. The owner is George, give him a call, tell him I sent you 203-934-7317. They are having a 1500 Lap enduro in December with 10 4-man teams. They will run any class, electric or nitro that shows. Mainly the crowd has been nitro.
that must have been Karls table you were looking at..
I didn't break any of the times I was there......In fact,I was snoozing between heats...
Only got to go to three races...And I'm in first place in sebring series..untill they post the final two....
I'm gonna call Karl and see if we can make it up...I might come up alone if he doesn't want to go...I'll PM you ahead of time..
What cars are they running in nitro touring?..
11-10-2003, 03:41 PM
#8747
Tech Elite
iTrader: (13)
Join Date: Sep 2001
Location: Land of the Free, Home of the Brave
Posts: 2,928
Trader Rating: 13 (100%+)
Carl adn I are heading to southshore this weekend.
I am running the MTX, lots of NTC2's though.
I am running the MTX, lots of NTC2's though.
11-10-2003, 04:39 PM
#8748
Tech Initiate
Originally posted by raffaelli
There is a indoor nitro track in CT that I have been running the MTX-3 for the past couple of months. It is small, but lots of fun. I will run there all winter.
Harry, how is the crowd at the barn? We were thinking of rally on fridays there.
There is a indoor nitro track in CT that I have been running the MTX-3 for the past couple of months. It is small, but lots of fun. I will run there all winter.
Harry, how is the crowd at the barn? We were thinking of rally on fridays there.
Do you have an address or link for that track? I might move to NY around Christmass. If i have time i would continue to race and im looking for indoor nitro tracks.
chris
11-10-2003, 04:47 PM
#8749
Tech Elite
iTrader: (13)
Join Date: Sep 2001
Location: Land of the Free, Home of the Brave
Posts: 2,928
Trader Rating: 13 (100%+)
11-11-2003, 07:31 AM
#8751
I think all you guys should move here to Australia for the next 6 months......Then you can race all you like...
11-11-2003, 12:16 PM
#8752
rcmike
Thankyou for the info
i found it at one of the above mentioned
have a good day
i found it at one of the above mentioned
have a good day
11-11-2003, 09:28 PM
#8753
Loosenut: How was Lemanns today ? Thanks for the invite.
11-12-2003, 08:16 AM
#8754
Tech Fanatic
Lemans sucked big time! They didn't spray the track after it rained. So it was like driving on ice. Plus the track is really dirty for some reason. Now I'm gonna have to spend couple days taking my car apart to clean
It was cool though, I almost finish breaking in my d5.
So which race are you attending in the next couple of weeks/month?
G
It was cool though, I almost finish breaking in my d5.
So which race are you attending in the next couple of weeks/month?
G
11-12-2003, 03:27 PM
#8755
SBmon
Hey give Lee at Winner's Circle a call or look...1.866.nitrorc >he had cars in stock, and he's near Atlanta.
11-12-2003, 04:30 PM
#8756
red5
thankyou for the info
i found the kit with the mr12 locally so i went ahead and got it
next the assembly , im sure i will have a bunch of questions for you guys in the near future , i would like to say in advance thankyou for any input/tips
so far i just plan on putting in uviversals upfront and leave everything else stock
a friend of mine who runs the car said to do alot of sanding on the brake material (he said to sand atleast 1/2 of it away)
to free up the drive train , does this sound correct
thanks
sb
i found the kit with the mr12 locally so i went ahead and got it
next the assembly , im sure i will have a bunch of questions for you guys in the near future , i would like to say in advance thankyou for any input/tips
so far i just plan on putting in uviversals upfront and leave everything else stock
a friend of mine who runs the car said to do alot of sanding on the brake material (he said to sand atleast 1/2 of it away)
to free up the drive train , does this sound correct
thanks
sb
11-12-2003, 04:55 PM
#8757
Re: red5
Originally posted by sbmon
thankyou for the info
i found the kit with the mr12 locally so i went ahead and got it
next the assembly , im sure i will have a bunch of questions for you guys in the near future , i would like to say in advance thankyou for any input/tips
so far i just plan on putting in uviversals upfront and leave everything else stock
a friend of mine who runs the car said to do alot of sanding on the brake material (he said to sand atleast 1/2 of it away)
to free up the drive train , does this sound correct
thanks
sb
thankyou for the info
i found the kit with the mr12 locally so i went ahead and got it
next the assembly , im sure i will have a bunch of questions for you guys in the near future , i would like to say in advance thankyou for any input/tips
so far i just plan on putting in uviversals upfront and leave everything else stock
a friend of mine who runs the car said to do alot of sanding on the brake material (he said to sand atleast 1/2 of it away)
to free up the drive train , does this sound correct
thanks
sb
1/. the steel brake pad backing plate is not flat due to the manufactoring process.
2/. the stock brake pad thickness is too fit
and there are things you need to aware.
1/. the brake pad holes dont blind with the brake pins on the bulk head.
2/. if you use the stock brake pad, sand it until the pad surface is flat.
I use the option yellow brake pad and that doesnt blind with the rotor disc at all.
11-12-2003, 09:33 PM
#8758
hollow 2 speed shaft
Looking for a hollow 2 speed shaft. I've seen one advertised in the past couple of weeks but can't remember where I saw it. Any one know who makes/sells them??????? jack
11-12-2003, 09:39 PM
#8759
Re: red5
Originally posted by sbmon
thankyou for the info
i found the kit with the mr12 locally so i went ahead and got it
next the assembly , im sure i will have a bunch of questions for you guys in the near future , i would like to say in advance thankyou for any input/tips
so far i just plan on putting in uviversals upfront and leave everything else stock
a friend of mine who runs the car said to do alot of sanding on the brake material (he said to sand atleast 1/2 of it away)
to free up the drive train , does this sound correct
thanks
sb
thankyou for the info
i found the kit with the mr12 locally so i went ahead and got it
next the assembly , im sure i will have a bunch of questions for you guys in the near future , i would like to say in advance thankyou for any input/tips
so far i just plan on putting in uviversals upfront and leave everything else stock
a friend of mine who runs the car said to do alot of sanding on the brake material (he said to sand atleast 1/2 of it away)
to free up the drive train , does this sound correct
thanks
sb
11-12-2003, 10:17 PM
#8760
Re: hollow 2 speed shaft
Originally posted by clmbia45
Looking for a hollow 2 speed shaft. I've seen one advertised in the past couple of weeks but can't remember where I saw it. Any one know who makes/sells them??????? jack
Looking for a hollow 2 speed shaft. I've seen one advertised in the past couple of weeks but can't remember where I saw it. Any one know who makes/sells them??????? jack