Team Associated TC5
#9076
Do you stagger how long you have your front additive on for compared to the rear? If not i would try that. If you do i would try 5 minutes less for the front additive compared to the rear. it may be that your front tyres are gumming up rather than the rear loosing grip so a change of compound might be on the cards aswell.
#9078
Do you stagger how long you have your front additive on for compared to the rear? If not i would try that. If you do i would try 5 minutes less for the front additive compared to the rear. it may be that your front tyres are gumming up rather than the rear loosing grip so a change of compound might be on the cards aswell.
I don't stanger when I sauce'em, just slap it on all corners...go run my TA heat then run TC...
Very possible the fronts are just 'coming in'! like you suggested. I never thought of that...it definitely has plenty of steering. I've been running the 2x pinks on all four just to keep it simple, easier to rotate, cheaper...but you may be on to something. I got some jaco orange/2xpinks but have to find/determine the Jaco compounds to colors somewhere...been too long.
Ideally, I'd rather have the car loose and then 'come in'/tighten up instead of the opposite....I'm guessing from the comments the change mid run is purely tire/compound related and not really anything big to do with setup?
Thanks for the school'n! very helpful and much appresh'd!
#9079
#9080
Tech Fanatic
iTrader: (23)
I am looking for a TC5R. Doesnt anyone know of one or have one for sell? Email me at [email protected]
#9086
Tech Champion
iTrader: (22)
Quiz for the setup Guru's.... What would you change on Keven's setup if you had 1/2 the grip of the snowbirds track? The local's that went to the birds said our track is about 1/2 the grip of the birds... What would you change and why? OR do you really have to see what the car is doing to make a call on what to change?
I'm trying to learn as much as I can about setups. I've been running this setup except I haven't gotten to the Arm mounts changes & running AE springs & pistions, I'm still running the Foam kit setting for the arm mounts (2's both front arms, 3's both rear arms. I like the setup much better than the Foam kit setup so far but haven't got to run it much.
I'm trying to learn as much as I can about setups. I've been running this setup except I haven't gotten to the Arm mounts changes & running AE springs & pistions, I'm still running the Foam kit setting for the arm mounts (2's both front arms, 3's both rear arms. I like the setup much better than the Foam kit setup so far but haven't got to run it much.
#9087
Tech Rookie
Setup sheets
I have found a site where you can store setup sheets of your TC5:
rc-setups.com
Before posting you have to sign-up.
rc-setups.com
Before posting you have to sign-up.
#9088
#9089