Tire Options for 1/16 Mini Slash
#17
Tech Champion
iTrader: (48)
Yeh lets stick with listing only wheels/tires that we don't need to trim any of the truck body, I will say that if slight trimming/modding or tuning to fit is acceptable. (Slight trimming/modding would be classified as using sand paper with not a lot of pressure applied. Major trimming/modding would be using a tool of sorts to cut or reduce the truck body in some way).
#20
I am running the Kyosho mini inferno wheels/tires (not the mini inferno ST, they are wider)They are the closest size to the stock wheels/tires in height and width, you need the mini inferno adapters to run them. Night and day difference in grip compared to the stockers.
#21
Tech Champion
iTrader: (48)
#22
Vendetta ST wheels
Mini Quake onroad tires
stock DTX foams only in the rear
Stock foams samiched with HPI 24mm hard foams in front
Handles like a dream onroad.
Pretty much any 2" or 1.9" onraod tire will fit. The Mini Quake split block tires will also fit the ST rims and are a little more suited to low-bite tracks.
Mini Quake onroad tires
stock DTX foams only in the rear
Stock foams samiched with HPI 24mm hard foams in front
Handles like a dream onroad.
Pretty much any 2" or 1.9" onraod tire will fit. The Mini Quake split block tires will also fit the ST rims and are a little more suited to low-bite tracks.
#24
Tech Adept
A significant amount of tire/Wheels from HPI will work on the Mini Slash. The 10th scale road tires come in various compounds and they have a rally tire that has some deeper treads. I beleive they are all 12mm hex so no adapters needed. Check out the HPI Racing website
http://www.hpiracing.com/hpitires/touring/
I also understand that Tamiya has some tires that will work too. I am very interested in soft road tires for carpet.
http://www.hpiracing.com/hpitires/touring/
I also understand that Tamiya has some tires that will work too. I am very interested in soft road tires for carpet.
#27
#29
Hmm wish you did read the thread, since you would know this thread is only for 1/16 slash and I'm assuming from your pic that you are discussing putting those tires/wheels on a e-revo. Please only post about the 1/16 slash, there are plenty of threads e-revo's so post there.