HPI Cup Racer 1M
#1711
I have my Porsche together but haven't found anyone racing them around here yet. I would like some input from the guys who have a class of them racing; what size motor do you run? Any limit on speed controls or anything? I would like to get a class started in my area and was thinking about using the new 25.5 brushless system from Novak for the VTA Racers.
I've been running my Fujin at the Strictly races in Norridge. It'd be nice to see more drivers with 4WD minis.
#1712
Tech Initiate
Hi guys,
Just few words to show you that HPI is working on a potential evolution of the current Cup Racer. I prefer to be clear once again: these pictures below only show a car project only (Atsushi Hara prototype actually), not a production kit.
Final Design/production/release date are to be decided, so just enjoy things as they are now !
Just few words to show you that HPI is working on a potential evolution of the current Cup Racer. I prefer to be clear once again: these pictures below only show a car project only (Atsushi Hara prototype actually), not a production kit.
Final Design/production/release date are to be decided, so just enjoy things as they are now !
#1713
I'm going off a huge hunch and not the picture, but I think he'd most likely be using an LRP/Nosram motor since he's hooked up with them. Just a guess though
We run 21.5 or Silver Can motors in our class. No boost, must use realistic wheels and body (I.E. No TC style garbage in this class), bla bla bla... We just had our first CR/Mini class last week and it was a BLAST! The 54mm tires work wayyy better than the 60mm tires.
We run 21.5 or Silver Can motors in our class. No boost, must use realistic wheels and body (I.E. No TC style garbage in this class), bla bla bla... We just had our first CR/Mini class last week and it was a BLAST! The 54mm tires work wayyy better than the 60mm tires.
#1714
Motor is TEAM-POWERS 13.5.
Check it out on TEAM-POWERS website. ...team-powers.com
Keep racing
Check it out on TEAM-POWERS website. ...team-powers.com
Keep racing
#1715
I stand corrected.
#1716
Tech Initiate
I sheered off the front diff output cup... part hpi 85281
Anyone make it in Alu.??????
id search through the tread but i dont have the time to right now.
Anyone make it in Alu.??????
id search through the tread but i dont have the time to right now.
#1717
There aren't any metal replacements... yet. I have a strong feeling there is a certain somebody working on a drop in metal replacement.
Redbones seated some 18R axel pins into the plastic drive cup. Here's the post:
http://www.rctech.net/forum/5964257-post666.html
It seems like a pretty good fix. I've yet to try it since I've never broken one (knock on wood).
Redbones seated some 18R axel pins into the plastic drive cup. Here's the post:
http://www.rctech.net/forum/5964257-post666.html
It seems like a pretty good fix. I've yet to try it since I've never broken one (knock on wood).
#1718
Tech Master
iTrader: (26)
We're racing 4WD minis at Asphalt Assault. 21.5T brushless or 27T brushed, open esc, mini wheels & mini rubber tires (no TC size), no TC style mini bodies. Bring it out to Harbor for the first leg on the 27th!
I've been running my Fujin at the Strictly races in Norridge. It'd be nice to see more drivers with 4WD minis.
I've been running my Fujin at the Strictly races in Norridge. It'd be nice to see more drivers with 4WD minis.
#1719
Finaly got my self to order an Exotek CRX chassie for my Cup Racer!
I think i came out nice!
What du you like the mix with the blue stuff?
#1723
Can someone help me out with my cup racer? I posted a thread in the Rookie-Zone section of the forums.
I would post a link to it but the forum won't allow it.
Thanks!
I would post a link to it but the forum won't allow it.
Thanks!
#1725
With my cup racer, only the steering works. The motor only works once in awhile if not at all.
My post from the other thread on here:
My post from the other thread on here:
Hey everyone,
I recently felt like getting a R/C. So I went with a HPI Datsun 240z Cup Racer. I added some accessories like brake calipers and Volk TE37 rims with small tires....haha.
Here's a list of which parts I have:
- HPI RF-1 Receiver
- HPI TF-1 Radio System
- HPI X30RE Motor
- HPI EN-1 ESC
- HPI SF-5 Servo for steering
I can't get the car to move in either forward or reverse. The motor does work because once or twice it did turn over but died. The steering functions are working properly. So what do you think is the problem?
I'm not looking for the best parts out there, just trying to have some fun at local car meets.
Also, I have a Turnigy 2200 mah 2 cell lipo. Charged with an Accucell 6.
Thanks!
I recently felt like getting a R/C. So I went with a HPI Datsun 240z Cup Racer. I added some accessories like brake calipers and Volk TE37 rims with small tires....haha.
Here's a list of which parts I have:
- HPI RF-1 Receiver
- HPI TF-1 Radio System
- HPI X30RE Motor
- HPI EN-1 ESC
- HPI SF-5 Servo for steering
I can't get the car to move in either forward or reverse. The motor does work because once or twice it did turn over but died. The steering functions are working properly. So what do you think is the problem?
I'm not looking for the best parts out there, just trying to have some fun at local car meets.
Also, I have a Turnigy 2200 mah 2 cell lipo. Charged with an Accucell 6.
Thanks!