The Speed Passion Thread
#6331
#6332
on another note........
whos hobby shop has Speedpassion 1/8 stuff in stock and can sell over the phone/internet?
whos hobby shop has Speedpassion 1/8 stuff in stock and can sell over the phone/internet?
#6333
I never saw a reply to this. Im encountering the same issue. Is there a FAQ somewhere for noobs at the LCD device? Like where on the Speedpassion site do you get the latest USB and firmware. As well as what is causing the above (Checked firewall already).
#6334
Tech Elite
iTrader: (114)
Capacitor
Hi
Does someone have the Manufacture product code number for this capacitor, I used the link and they won't post to Australia, would like to get 3 of them, if anyone could get 3 and I could pay for them by paypal and they could post them to me that would be great.
Regards
Gary
Does someone have the Manufacture product code number for this capacitor, I used the link and they won't post to Australia, would like to get 3 of them, if anyone could get 3 and I could pay for them by paypal and they could post them to me that would be great.
Regards
Gary
If you guys want to use the capacitors that Team Tamiya is using for touring cars w/SP esc's.......here is the link. They work awesome!
http://www.amazon.com/gp/product/B00...ef=oss_product
http://www.amazon.com/gp/product/B00...ef=oss_product
#6337
Tech Elite
iTrader: (19)
Hi
Does someone have the Manufacture product code number for this capacitor, I used the link and they won't post to Australia, would like to get 3 of them, if anyone could get 3 and I could pay for them by paypal and they could post them to me that would be great.
Regards
Gary
Does someone have the Manufacture product code number for this capacitor, I used the link and they won't post to Australia, would like to get 3 of them, if anyone could get 3 and I could pay for them by paypal and they could post them to me that would be great.
Regards
Gary
#6338
hi everyone, just a quick suggestion....
yesterday at my track i was running like always my sp v3 13,5
as an older guy stopped me and looked to my motor.
he made me rotate the sensor plug from 0 degrees to maximum.
i really enjoy this modification, motor was brilliant and did not overheat as i m running 5,6 ratio.
my question is: is legal to run this modification in stock class?
and shall i move and regulate that parameter as i prefer considering track, ratio, ecc??
thanks a lot
yesterday at my track i was running like always my sp v3 13,5
as an older guy stopped me and looked to my motor.
he made me rotate the sensor plug from 0 degrees to maximum.
i really enjoy this modification, motor was brilliant and did not overheat as i m running 5,6 ratio.
my question is: is legal to run this modification in stock class?
and shall i move and regulate that parameter as i prefer considering track, ratio, ecc??
thanks a lot
#6339
Tech Regular
Hi
Does someone have the Manufacture product code number for this capacitor, I used the link and they won't post to Australia, would like to get 3 of them, if anyone could get 3 and I could pay for them by paypal and they could post them to me that would be great.
Regards
Gary
Does someone have the Manufacture product code number for this capacitor, I used the link and they won't post to Australia, would like to get 3 of them, if anyone could get 3 and I could pay for them by paypal and they could post them to me that would be great.
Regards
Gary
I'm using the ones I bought from this guy in the UK and they works like a charm: http://cgi.ebay.co.uk/5x-2200uF-25V-...19137586068120
Last edited by Fastfreddy74; 01-21-2011 at 06:06 AM.
#6340
hi everyone, just a quick suggestion....
yesterday at my track i was running like always my sp v3 13,5
as an older guy stopped me and looked to my motor.
he made me rotate the sensor plug from 0 degrees to maximum.
i really enjoy this modification, motor was brilliant and did not overheat as i m running 5,6 ratio.
my question is: is legal to run this modification in stock class?
and shall i move and regulate that parameter as i prefer considering track, ratio, ecc??
thanks a lot
yesterday at my track i was running like always my sp v3 13,5
as an older guy stopped me and looked to my motor.
he made me rotate the sensor plug from 0 degrees to maximum.
i really enjoy this modification, motor was brilliant and did not overheat as i m running 5,6 ratio.
my question is: is legal to run this modification in stock class?
and shall i move and regulate that parameter as i prefer considering track, ratio, ecc??
thanks a lot
Should be legal for stock racing, since different brands of motors come with different amounts of static timing.
#6341
#6342
#6343
Tech Elite
iTrader: (157)
Help with Citrix Club Spec ESC
I just bought a used speed passion citrix club spec combo. I believe the esc is good. The seller seemed like a good guy.
I plug in a lipo battery that is charged (2 cell) cell one is 4.03 cell two is 4.06. I'm getting ready to set the throttle range for the first time so I turn on my radio, hold the set button and turn on the esc.
The esc powers up, the fan goes on, the steering works the red light and the yellow light come on, but then the yellow light goes out and the red light starts flashing in 1 second intervals and the esc starts beeping in 1 second intervals. The manual describes this as the "Input voltage abnormal alert". I know this can be caused if the voltage is either too high or too low. I take a 2400mah nimh pack that just came off the charger and plug it in. Exact same thing happens.
So I decide to try and get the programming box to work. The first couple tries, it doesn't. I unplug the fan and it works. I set the LVC to 3.0 and power down the esc. Same problem again. I try to use the program box and it won't work with or without the fan plugged in. I get the Input voltage abnormal alert.
Anyone have any idea what I could be doing wrong?
I plug in a lipo battery that is charged (2 cell) cell one is 4.03 cell two is 4.06. I'm getting ready to set the throttle range for the first time so I turn on my radio, hold the set button and turn on the esc.
The esc powers up, the fan goes on, the steering works the red light and the yellow light come on, but then the yellow light goes out and the red light starts flashing in 1 second intervals and the esc starts beeping in 1 second intervals. The manual describes this as the "Input voltage abnormal alert". I know this can be caused if the voltage is either too high or too low. I take a 2400mah nimh pack that just came off the charger and plug it in. Exact same thing happens.
So I decide to try and get the programming box to work. The first couple tries, it doesn't. I unplug the fan and it works. I set the LVC to 3.0 and power down the esc. Same problem again. I try to use the program box and it won't work with or without the fan plugged in. I get the Input voltage abnormal alert.
Anyone have any idea what I could be doing wrong?
#6344
Tech Champion
iTrader: (17)
Hey Solara, I ran my Cirtix Club Spec at TCS Regional today and I found out that my ESC's ABS Brake is totally lost no matter how I set it using the program card (0% or 100%). Basically, I lost my brake on the ESC. But something I didn't understand is that, drag brake still works (my only other alternative since I don't like to run drag brake).
I've reset the ESC a few times and still had the same issue. Is my brake FETs blown? How can I get a warranty if it is defective?
Thanks.
I've reset the ESC a few times and still had the same issue. Is my brake FETs blown? How can I get a warranty if it is defective?
Thanks.
Make sure you read thru everything and provide everything listed on the page.
http://www.speedpassion.net/us/contact.asp
#6345