Hot Bodies TCXX
#226
You're welcome Nolan. Yeah not too bad after only having about 9 minutes of track time with it on asphalt for the 1st time. I was able to finish out front in my Q1 putting me 3rd going into the Q2. I made couple of changes and the car felt really good in warmup for Q2 but I stripped a rear belt and was relegated to 4th overall going into the main. My plan was to get a good start and get by 3rd fast enough to stay close to Rick and Barry which I did but hammered 3 different times by other cars thus ending my run. But I am extremly happy with the potential!! We were still able to secure a podium spot with Hiro finishing in 3rd (Nice work Hiro-San!). Attached is my setup.
#228
#229
Tyres Sorex 36
Track medium grip
#231
Tech Elite
iTrader: (8)
This might be close enough to work with a little massaging:
http://www.spec-r.com/default/index....roducts_id=162
ID is going to be ~4mm, so you could enlarge that with a file if it's too small. I don't know about the OD, but it's probably in the right ballpark.
-Mike
#232
Tech Elite
iTrader: (8)
The instructions say it's 4.1x11.5x0.2mm.
This might be close enough to work with a little massaging:
http://www.spec-r.com/default/index....roducts_id=162
ID is going to be ~4mm, so you could enlarge that with a file if it's too small. I don't know about the OD, but it's probably in the right ballpark.
-Mike
This might be close enough to work with a little massaging:
http://www.spec-r.com/default/index....roducts_id=162
ID is going to be ~4mm, so you could enlarge that with a file if it's too small. I don't know about the OD, but it's probably in the right ballpark.
-Mike
Anyone have one of these they are willing to part with? Odd spares.....Fred...Korey? I'll obviously pay for the part and shipping. I want to play with my TCXX this weekend.
#234
Tech Elite
iTrader: (8)
The instructions say it's 4.1x11.5x0.2mm.
This might be close enough to work with a little massaging:
http://www.spec-r.com/default/index....roducts_id=162
ID is going to be ~4mm, so you could enlarge that with a file if it's too small. I don't know about the OD, but it's probably in the right ballpark.
-Mike
This might be close enough to work with a little massaging:
http://www.spec-r.com/default/index....roducts_id=162
ID is going to be ~4mm, so you could enlarge that with a file if it's too small. I don't know about the OD, but it's probably in the right ballpark.
-Mike
#236
Tech Addict
Brand NEW TCX for sale at a bargain price
this is not a for sale section
Last edited by Marcos.J; 09-27-2012 at 08:21 AM. Reason: issued infraction
#238
Tech Adept
Hi did anyone else experience the shafts coming out with the steel out drives? Not tried plastic yet so will have to see. It just seems the shafts are too short for the cups is it the +1mm wider front or something else maybe 46 mm shafts should have been supplied? Thanks J
#239
Tech Addict
iTrader: (12)
Anyone know where I can find a complete parts list for the TCXX?
I want to order a bunch of parts when I order my kit.
Are the suspension arms the same as TCX? I think that is what Fred had mentioned earlier.
Any other recommendations on parts besides the usual rear hubs, chubs and knuckles?
Never mind, found the parts list:
http://www.hpieurope.com/parts.php?lang=en&partNo=68299
I want to order a bunch of parts when I order my kit.
Are the suspension arms the same as TCX? I think that is what Fred had mentioned earlier.
Any other recommendations on parts besides the usual rear hubs, chubs and knuckles?
Never mind, found the parts list:
http://www.hpieurope.com/parts.php?lang=en&partNo=68299
Last edited by outtafocus; 09-27-2012 at 08:26 AM.
#240
Tech Elite
iTrader: (8)
Anyone know where I can find a complete parts list for the TCXX?
I want to order a bunch of parts when I order my kit.
Are the suspension arms the same as TCX? I think that is what Fred had mentioned earlier.
Any other recommendations on parts besides the usual rear hubs, chubs and knuckles?
Never mind, found the parts list:
http://www.hpieurope.com/parts.php?lang=en&partNo=68299
I want to order a bunch of parts when I order my kit.
Are the suspension arms the same as TCX? I think that is what Fred had mentioned earlier.
Any other recommendations on parts besides the usual rear hubs, chubs and knuckles?
Never mind, found the parts list:
http://www.hpieurope.com/parts.php?lang=en&partNo=68299
as well you can load the manual