2LikesTamiya TB-Evolution IV
07-20-2004 | 01:18 AM
#677
Originally posted by HYPA
Hey guys, just ordered my Evo IV today and I was wondering if Tamiya have released a titanium turnbuckle set for the car? If not will any of the 415 turnbuckles fit?
Cheers
Hey guys, just ordered my Evo IV today and I was wondering if Tamiya have released a titanium turnbuckle set for the car? If not will any of the 415 turnbuckles fit?
Cheers
...but I have used the TRF alloy ones and I ordered 4 32mm ones 2 28mm ones and 1 spsre on for the steering servo from the 415 (38-40mm).-Dave
07-20-2004 | 03:28 AM
#679
Tech Master
Joined: May 2003
Posts: 1,245
From: UK
Originally posted by V12
Thanks Dave.
so if I want using the suspension upgrade kit on the EVO III maybe I also should go for the 415 blocks.
Is the EVO IV using AA blocks or DD blocks in the front?
Things like wheelbase and battery position may be a little different but in the end this should be very similar to an EVOIV.
Thanks Dave.
so if I want using the suspension upgrade kit on the EVO III maybe I also should go for the 415 blocks.
Is the EVO IV using AA blocks or DD blocks in the front?
Things like wheelbase and battery position may be a little different but in the end this should be very similar to an EVOIV.
i think this is the lightest car ive ever had.
the suspension blocks are same height as evo3 blocks.
on the front the car comes with AA blocks for front and AE blocks on rear.
you could put 415 blocks on to lower that roll center but remember to readjust the droop.
the car comes with silver anti roll bars and links and mounts.
iam just using the bars from the 415/evo3 range.
07-20-2004 | 04:38 AM
#680
Originally posted by izzyracer
This might be to much to ask. but for ones who already has the EVO 4, can someone put together all the screws necessary to make up the kit?
I'd like to have my screws ready.
Thanks
This might be to much to ask. but for ones who already has the EVO 4, can someone put together all the screws necessary to make up the kit?
I'd like to have my screws ready.
Thanks
Here you go
3x14 Button x4
3x12 Button x8
3x10 Button x12
3x8 Button x36
3x16 Counter x2
3x10 Counter x5
3x8 Counter x35
I hope this helps you all out to get a head start
-Dave
07-20-2004 | 05:57 AM
#682
Originally posted by Rick Draper
No they arnt, they are evo 3 ones ie 415 ones + 1mm. Rick
No they arnt, they are evo 3 ones ie 415 ones + 1mm. Rick
... But I have switched out the rear A & E blocks for the 415 ones also the rear front A block for the 415 A block for a smigine more kick up ..But thanks for the correction to what..I forgot to update..
-Dave
07-20-2004 | 06:05 AM
#687
Originally posted by HPZ
Hey guys, since the evoIV doesn't come with the roll bars is it possible to use the evo3 ones instead?
Hey guys, since the evoIV doesn't come with the roll bars is it possible to use the evo3 ones instead?
-Dave
07-20-2004 | 06:09 AM
#690
Originally posted by HPZ
Is the silver roll bar any particular stiffnest? eg. soft , medium or hard?
i'm quite noob when it comes to these things, i like to get my info right
Is the silver roll bar any particular stiffnest? eg. soft , medium or hard?
i'm quite noob when it comes to these things, i like to get my info right
-Dave