Community
Wiki Posts
Search
Like Tree5Likes

SC10 4x4 Thread

Thread Tools
 
Search this Thread
 
Old 10-17-2011 | 11:32 AM
  #8851  
old&slow's Avatar
Tech Regular
iTrader: (2)
 
Joined: Jul 2011
Posts: 327
Default

Dang really marcus 10 up front.

Just got the thing put back together from pinning it, now I have to rip it apart to switch out the front diff oil .....

oh well back to the garage .

Glad I have the day off to wrench on it , was hoping to go run some packs through it. Only packs i will be running today will be through my hitachi R&R ing screws

got anything else for me before I put it back together


Thanks for all the imput and time you all have invested and share the results with the rest of us.

J
old&slow is offline  
Old 10-17-2011 | 12:05 PM
  #8852  
Cameron Kellogg's Avatar
Tech Champion
iTrader: (45)
 
Joined: Nov 2007
Posts: 5,776
From: Idaho
Default

Not sure why anyone would not do the pin mod. Once the parts are modified the truck goes back together with or with out the pin installed. If you don't like the pinned set-up then remove the pin and enjoy your new lightened top shaft.
Cameron Kellogg is offline  
Old 10-17-2011 | 12:12 PM
  #8853  
tony montana's Avatar
Tech Champion
iTrader: (77)
 
Joined: Aug 2002
Posts: 6,500
From: Leonardtown Md.
Default

Can someone make a YouTube video on how to dothe pin mod step by step
tony montana is offline  
Old 10-17-2011 | 12:20 PM
  #8854  
Artikbot's Avatar
Tech Regular
 
Joined: Apr 2011
Posts: 323
From: Catalunya, Spain
Default

Easier than the tutorial CraigMBA did like 7 pages before... I think it can't be done.
Artikbot is offline  
Old 10-17-2011 | 12:27 PM
  #8855  
1Fastpede's Avatar
Tech Master
iTrader: (53)
 
Joined: Aug 2010
Posts: 1,757
From: McKinney,TX
Default

Originally Posted by tony montana
Can someone make a YouTube video on how to dothe pin mod step by step
http://www.rctech.net/forum/9764733-post8374.html
1Fastpede is offline  
Old 10-17-2011 | 12:34 PM
  #8856  
Tech Elite
iTrader: (33)
 
Joined: Sep 2002
Posts: 2,384
From: Austin, Tx
Default

what size drill bit did you use?
dgrobe2112 is offline  
Old 10-17-2011 | 12:46 PM
  #8857  
CraigMBA's Avatar
Tech Elite
iTrader: (22)
 
Joined: Mar 2003
Posts: 2,838
From: Valley of the Dirt, CA
Default

Use a drill bit close to the size roll pin you choose.

I used a 3/32 spring roll pin, and should of stopped at 3/32.
CraigMBA is offline  
Old 10-17-2011 | 12:50 PM
  #8858  
fastrc64's Avatar
Tech Adept
iTrader: (1)
 
Joined: May 2010
Posts: 153
Default

Originally Posted by pvalenti
Krio,

Most of the guys I run with are going with spacers under the camber links to avoid that rolling or 'tripping' as you call it, rather than adjusting the camber to such a great angle.

Also replacing those front BLUE springs with YELLOW will help that problem.

I was pretty sure that you were talking about an outdoor track that you were running at just above here? Dakota's track is INDOORS? Impressive to have an indoor facility at your home (or Dakota's)!

If you are talking about more than one track, well...you should know that you'll have to change your set-up to the track. So I must be mistaken somehow in thinking we are talking about more than 1 track/situation.
guys Dakotas sct ten 4x4 has all kinds of upgrades that very few people can even get their hands on so don't sweat it
fastrc64 is offline  
Old 10-17-2011 | 03:43 PM
  #8859  
Tech Elite
iTrader: (270)
 
Joined: Dec 2010
Posts: 3,882
From: Florida
Default

Ok Had some time to run some laps. I really like the Pin mod but i can honestly say the truck still does not have the Snap out of the corners like my losi! Any help on this? Or what am i missing?
Er8sr is offline  
Old 10-17-2011 | 03:45 PM
  #8860  
MantisWorx's Avatar
Tech Champion
iTrader: (28)
 
Joined: Jun 2010
Posts: 5,955
Default

Originally Posted by Er8sr
Ok Had some time to run some laps. I really like the Pin mod but i can honestly say the truck still does not have the Snap out of the corners like my losi! Any help on this? Or what am i missing?
whats your setup?
MantisWorx is offline  
Old 10-17-2011 | 03:45 PM
  #8861  
1Fastpede's Avatar
Tech Master
iTrader: (53)
 
Joined: Aug 2010
Posts: 1,757
From: McKinney,TX
Default

Originally Posted by Er8sr
Ok Had some time to run some laps. I really like the Pin mod but i can honestly say the truck still does not have the Snap out of the corners like my losi! Any help on this? Or what am i missing?
Clutch basket?

Why did you not use the PRO4 in the sc10?
1Fastpede is offline  
Old 10-17-2011 | 03:50 PM
  #8862  
MantisWorx's Avatar
Tech Champion
iTrader: (28)
 
Joined: Jun 2010
Posts: 5,955
Default

how are you guys gearing the 4000kv pro4 motors? 16t?
MantisWorx is offline  
Old 10-17-2011 | 04:03 PM
  #8863  
symmetricon's Avatar
Tech Elite
iTrader: (27)
 
Joined: Jun 2009
Posts: 4,882
From: houston
Default

Originally Posted by MantisWorx
how are you guys gearing the 4000kv pro4 motors? 16t?
i am currently geared 14/58, but am not sure if this is going to be enough. i could always add a tad bit of timing.
symmetricon is offline  
Old 10-17-2011 | 04:52 PM
  #8864  
Tech Elite
iTrader: (270)
 
Joined: Dec 2010
Posts: 3,882
From: Florida
Default

Originally Posted by MantisWorx
whats your setup?
I have tried 2 Setups

Novak pro Esc Novak 5.5 550 geared 15/62

Novak pro Esc Tekin pro4 4000 Geared 14/62

Truck just does not have speed out of the corners..

Iam using the High Torque slipper pad with vented hub..
Er8sr is offline  
Old 10-17-2011 | 04:56 PM
  #8865  
CoyoteSlash's Avatar
iTrader: (8)
 
Joined: May 2011
Posts: 1,311
From: Portland, OR
Default

Castle 1415 550 Motor 4pole
Standard pads
Vented hub
Pinned shaft

- Still had to loosen the slipper. Blew up my idler. (stated the slipper needed to be loosened for pinned shafts 5 pages ago)
CoyoteSlash is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.